Normally fitted to standard weight gates and sheds.
Best current price£15.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£15.99Visit shop B&Q - 450mm 18" No.121 Medium Tee HingesPerrypackGalvanised
Visit shop1 offer from £15.99
View price history by clicking the chart icon.
This guide is for DIYers and homeowners needing reliable hardware for standard weight gates and sheds. The A Perry Medium Tee Hinges in Black offer a durable and classic solution for securing doors and panels. A key benefit is their straightforward installation and robust construction, ensuring longevity. The primary caveat is their suitability for standard weight applications only, not for heavy-duty or specialized doors.
| Colour | Black |
|---|---|
| Model Part Number | 121 |
| Brand | A. Perry |
It is recommended to use wood screws appropriate for the thickness and type of wood of your gate or shed. Ensure they are long enough to provide a secure hold but not so long that they pierce through the other side.
Yes, the black finish is designed for outdoor conditions, but regular care and occasional lubrication will help maintain their appearance and function over time.
These hinges are primarily designed for wooden gates and doors. If you intend to use them on metal, you will need appropriate metal fasteners and potentially pre-drilling the metal.
For a standard shed door, two hinges are usually sufficient. For heavier doors or for added stability, three hinges may be considered.
These are classified as 'medium' hinges and are intended for standard weight gates and sheds. They are not rated for heavy-duty applications.
Use a soft, damp cloth. Avoid abrasive cleaners or scouring pads, as these can scratch or remove the finish.
Apply a small amount of lubricant (e.g., WD-40 or silicone spray) to the hinge pin and work the door back and forth.
Ensure all screws are tightened securely. If the door is too heavy for these hinges, consider a heavier-duty option.
Check for any obstructions or misalignment. Ensure the door frame and post are not warped. Clean and lubricate the hinge.
This may indicate excessive wear or exposure to harsh elements. Clean the affected area and consider reapplying a suitable metal paint or coating. For severe cases, replacement might be necessary.
Setup: To install the A Perry Medium Tee Hinges, ensure the gate or door is properly supported. Align the hinge leaf with the edge of the door and the tee plate with the gate post or frame. Mark the screw hole positions. Drill pilot holes if necessary, especially in harder woods. Secure the hinges using appropriate screws (typically wood screws of suitable length and gauge, not included). Ensure the door or gate swings freely after installation.
Compatibility: These hinges are best suited for standard weight doors and gates made from wood or composite materials. They are designed to fit typical gate and shed construction. Avoid using them on heavy-duty doors, metal gates, or where significant structural load is expected.
Care: Clean the hinges periodically with a damp cloth to remove dirt and debris. For optimal longevity, especially in coastal or high-humidity environments, consider applying a light coat of appropriate metal lubricant or protective spray annually. Avoid using abrasive cleaners that could damage the black finish.
