Best current price£27.90from B&Q
Shopping.co.uk recommended and popular offers
B&Q£27.90Visit shop B&Q - Coral Up And Down Lighting With PhotocellAnthracite Grey: 1X Light & 2X Gu10
Visit shop1 offer from £27.90
View price history by clicking the chart icon.
The Hispec Coral Up and Down Wall Light is an ideal choice for homeowners and business owners looking to enhance exterior aesthetics and security through automated illumination. This fixture features a sophisticated dual-directional beam that creates a dramatic visual effect on building facades, porches, or entryways. Its primary benefit is the integrated dusk-till-dawn photocell, which eliminates the need for manual switching; however, users should note that the light requires a steady power supply and is not suitable for locations where light pollution might affect the sensor's day/night detection.
| Colour | Grey |
|---|---|
| Brand | Hispec Electrical Products Limited |
Yes, as long as the replacement bulbs match the GU10 base and fit within the dimensions of the housing.
The standard unit is designed for standard on/off operation; it is not typically compatible with external dimmers due to the photocell sensor.
The photocell is hardwired to control the fixture; you can turn the power off at the wall switch, but you cannot bypass the sensor to turn it on manually while the sun is out.
IP44 indicates that the light is protected against solid objects larger than 1mm and is resistant to water splashing from any direction.
It is not recommended to paint the unit, as this may interfere with the seals and the functionality of the photocell sensor.
Check if the sensor is located in a dark area or if a reflective surface is casting a shadow on the sensor.
Ensure that the sensor is not being affected by its own light beam or nearby artificial light sources like street lamps.
Verify that the power supply is active at the circuit breaker and check that the GU10 bulbs are seated correctly in their sockets.
Installation should be performed by a qualified electrician to ensure safety and compliance with local building codes. Before mounting, ensure the wall surface is clean and level. The unit is designed for permanent wiring into your home's electrical system. To maintain the fixture's finish and longevity, wipe down the exterior casing occasionally with a soft, dry cloth to remove dirt or debris. Avoid using harsh chemical cleaners that could damage the grey powder-coated surface. Always ensure the power is isolated at the consumer unit before replacing the GU10 bulbs to prevent electrical shock. Ensure that the sensor is not obscured by overhanging eaves or heavy vegetation, as this may trigger false activation or prevent the light from turning off during the day.
