Hyco Wave Automatic 3kW Instant Water Heater - HW30A

Best current price£126.00from Bradfords
Best offers
Shopping.co.uk recommended and popular offers
Bradfords£126.00Visit shop Hyco Wave Instantaneous Hand Wash 3.0Kw Automatic Light
Visit shop
Best current price£126.00from Bradfords
Shopping.co.uk recommended and popular offers
Bradfords£126.00Visit shop Hyco Wave Instantaneous Hand Wash 3.0Kw Automatic Light
Visit shop1 offer from £126.00
View price history by clicking the chart icon.
2 offers from £69.99
View price history by clicking the chart icon.
The Hyco Wave HW30A is an instant water heater designed for users needing hot water for light hand washing at a single basin. Its key benefit is providing instant, energy-efficient hot water directly at the point of use, eliminating the need for large storage tanks and reducing heat loss. A potential consideration is its suitability for light use only, not for high-demand applications. It features automatic, no-touch operation alongside manual controls for temperature and flow rate, and its compact, ergonomic design is assembled in the UK.
| Model Part Number | HW30A |
|---|---|
| Brand | Hyco |
The Hyco Wave HW30A comes with a 1-year warranty from the date of purchase.
No, the HW30A is designed for light hand washing only and does not have the capacity or flow rate required for a shower.
Yes, due to the electrical requirements, installation should be performed by a qualified electrician. Plumbing connections should also be made by a professional if you are not experienced.
The unit is rated at 3kW, meaning it draws approximately 13 amps when in use.
You can adjust the temperature using the control dial, but precise temperature control can be influenced by the incoming water temperature and the selected flow rate.
The dimensions are Height: 170mm x Length: 240mm x Depth: 100mm.
It is suitable for light kitchen tasks such as rinsing or hand washing, but not for high-demand tasks like filling a large pot quickly.
Check that the unit is correctly connected to the power supply and that the circuit breaker is not tripped. Ensure the water supply is turned on and the inlet is not blocked. Verify that the sensor is clean and unobstructed.
Adjust the temperature control dial. Reduce the flow rate; a higher flow rate may result in less heated water. Ensure the incoming water temperature is not excessively cold.
Turn off the water supply and power immediately. Check all plumbing connections for tightness. If the leak persists, contact a qualified plumber or the manufacturer.
Clean the sensor area with a soft cloth. Ensure there are no objects blocking the sensor. Test the sensor by waving your hand directly in front of it.
Setup:
Compatibility:
Care: