Shopping.co.uk

Lightweight Pre-Drilled Recessed Bonnet Pin Plates - Black/Anodised

Lightweight Pre-Drilled Recessed Bonnet Pin Plates - Black/Anodised

These Recessed Bonnet Pin Plates are lightweight, pre-drilled alloy plates for slide pin type bonn...

Best current price£15.95from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£15.95Visit shop

Grayston Recessed Bonnet Pin Plates Motorsport Black Alloy GE515BL Race Rally

Visit shop

All Offers

4 offers from £15.95 - £16.40

View price history by clicking the chart icon.

eBayGrayston Recessed Bonnet Pin Plates Motorsport Black Alloy GE515BL Race Rally
Free delivery in 1–3 days
£15.95
Visit shop
Demon TweeksDemon Tweeks Recessed Bonnet Pin Plates - Black Anodised, Black
£2.50 delivery
£16.40
Visit shop

Product Information

Full details

These Lightweight Pre-Drilled Recessed Bonnet Pin Plates from Demon Tweeks are designed for motorsport enthusiasts and custom vehicle builders seeking a clean and secure mounting solution for slide pin type bonnet pins. Their primary benefit is offering a flush, integrated look while providing a robust anchor point. A key consideration is that the bonnet pins themselves are not included with this product.

All features

Model Part NumberGE515BL
BrandDemon Tweeks

Extended Product Information

FAQs

Are the bonnet pins included with the plates?

No, the bonnet pins are sold separately. These are only the mounting plates.

What type of bonnet pins are these plates designed for?

These plates are specifically designed to work with 'slide pin' type bonnet pins.

What material are the plates made from?

The plates are constructed from lightweight alloy with a black anodised finish.

How many plates are in a set?

The plates are sold in pairs, meaning you receive two plates per purchase.

Can I paint these plates?

While painting is possible, it may compromise the anodised finish and corrosion resistance. It's generally recommended to use them with their existing finish.

What tools are needed for installation?

You will typically need a drill, drill bits appropriate for metal, a wrench or socket set, and potentially a marker for marking positions.

How do I clean the black anodised finish?

Use a soft, damp cloth and mild soap if necessary. Avoid abrasive cleaners or tools that could scratch the finish.

Troubleshooting

Plates do not sit flush

Ensure the mounting holes are drilled cleanly and that there are no obstructions within the bonnet structure preventing the plate from seating correctly. Check for any burrs around the drilled holes.

Bonnet pins feel loose after installation

Verify that the bonnet pin mounting hardware is tightened securely. Ensure the plates themselves are firmly attached to the bonnet. Check that the correct size bolts/nuts are used for mounting the plates.

Anodised finish is scratched

Use a very mild metal polish and a soft cloth to carefully buff out minor scratches. Avoid aggressive polishing that could remove the anodising completely. For deep scratches, consider professional refinishing or replacement.

Pros and Cons

Pros

  • Enhances the aesthetic of the vehicle by providing a clean, recessed fit.
  • Lightweight construction contributes to overall vehicle weight reduction.
  • Pre-drilled holes simplify installation, especially for slide pin systems.
  • Durable anodised finish offers good protection against environmental factors.
  • Sold in pairs, providing a complete solution for a typical bonnet setup.

Cons

  • Bonnet pins are not included and must be purchased separately.
  • Requires precise drilling and fitting for a truly recessed installation.
  • Alloy construction may be less impact-resistant than steel alternatives.
  • Primarily suited for specific slide pin bonnet pin types.
  • Anodised finish can be scratched or damaged with abrasive cleaning.

Setup, Compatibility & Care

Setup:

  1. Determine the correct placement for your bonnet pins, ensuring adequate clearance and alignment.
  2. Carefully mark the positions for the pre-drilled holes on the bonnet.
  3. Drill the marked holes to the appropriate size for the plate's mounting bolts.
  4. Position the recessed plate and secure it using suitable bolts and nuts (not included).
  5. Install your compatible slide pin type bonnet pins through the plate and into the bonnet structure.

Compatibility:

  • These plates are designed specifically for slide pin type bonnet pins. Ensure your chosen pins are compatible.
  • Not designed for "flipper" style bonnet pins or other mechanisms.
  • Requires sufficient clearance within the bonnet panel for the recessed portion.

Care:

  • Clean the plates with a soft, damp cloth. Avoid abrasive cleaners or scouring pads, as these can damage the anodised finish.
  • Periodically check the mounting bolts for tightness, especially after track use.
  • Inspect the anodised finish for any signs of damage and address minor scratches carefully with a mild polish if necessary.

Price History

DatePrice
Visit shop