Best current price£64.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£64.99Visit shop B&Q - Multi Surface Biocide (2 X 5L + Sprayer) High Strength Ready-To-Use FungiMould & Algae Cleaner & Remover
Visit shop3 offers from £64.99
View price history by clicking the chart icon.
The Soluguard Multi-Surface Biocide Sprayer Kit is designed for homeowners and professionals tackling stubborn algae, fungi, and moss. Its primary benefit is effectively clearing biological growth from a wide array of surfaces, preparing them for further treatment or simply restoring their appearance. A key consideration is its high-strength formulation, requiring careful application and adherence to safety guidelines.
| Model Part Number | AM-SOLBIO SPR 2 |
|---|---|
| Brand | Soluguard |
Visible results typically appear within a few days to a week, depending on the severity of the growth and environmental conditions. Complete eradication may take longer.
Yes, it is generally recommended to rinse the treated surface thoroughly with clean water after the specified contact time to remove any residue and prevent potential discolouration.
It is advisable to test on a small, hidden area first as high-strength biocides can potentially affect certain paint finishes. Ensure thorough rinsing if applied.
Keep pets and children away from the treated area until it has completely dried and been rinsed thoroughly. Store the product securely out of their reach.
The product typically has a shelf life of 2-3 years when stored correctly in its original, unopened container. Refer to the product packaging for specific details.
Avoid application in freezing temperatures or when frost is expected. The product works best when temperatures are moderate and there is no risk of immediate frost.
Always wear chemical-resistant gloves, eye protection (goggles or face shield), and protective clothing. A mask may be necessary in poorly ventilated areas.
Ensure the correct dilution ratio was used and the surface was thoroughly wetted. For stubborn growth, a second application may be necessary after the recommended waiting period. Check environmental conditions; effectiveness can be reduced in very cold or dry weather.
This can occur if the product is too concentrated or left on the surface for too long without rinsing, especially on sensitive materials. Always perform a patch test in an inconspicuous area first. Rinse the surface thoroughly with clean water after the recommended contact time.
Check for blockages in the nozzle or filter. Ensure the pump mechanism is functioning and the container is properly sealed. Clean the sprayer components with water if residue is suspected.
Some odour may be present as the product breaks down biological matter. This is usually temporary. Ensure good ventilation in enclosed spaces. The odour should dissipate as the surface dries and is exposed to fresh air.
Setup: The sprayer kit typically requires minimal setup. Ensure the sprayer is correctly assembled and the concentrate is mixed with water according to the product label instructions. Always wear appropriate personal protective equipment (PPE) before handling.
Compatibility: This biocide is designed for use on a wide range of common building materials including brick, stone, concrete, render, wood, plastic, PVCU, polycarbonate, and roof tiles. Always test on an inconspicuous area first, especially on painted or delicate surfaces.
Care: Store the product in a cool, dry place away from direct sunlight and out of reach of children and pets. Clean the sprayer thoroughly after each use with fresh water. Dispose of any unused diluted product responsibly according to local regulations.
