Draper Gravity Feed HVLP Air Spray Gun 100ml - 09709

You need an air compressor that can supply at least 8cfm (226 L/min) at 30 psi (2 Bar).

Follow the paint manufacturer's recommendations for thinning. The correct viscosity will help with the paint application.

Disassemble the spray gun and clean all parts with the appropriate solvent for the paint type. Use the cleaning brush to clean the nozzle.

The product comes with a 6-month warranty (terms and conditions apply).

Yes, the Draper 09709 is suitable for use with all paint types, including water-based paints.

Always wear appropriate safety gear, including a respirator, eye protection, and gloves. Work in a well-ventilated area.

Clean the spray gun thoroughly after each use to prevent clogging and ensure optimal performance.

Check that the air compressor is turned on and supplying air. Ensure the fluid nozzle is not clogged. Clean the nozzle with the cleaning brush.

Adjust the fluid flow control and air pressure. Ensure the paint is properly thinned according to the manufacturer's instructions. Clean the nozzle.

Adjust the fan control to achieve the desired spray pattern. Ensure that the spray gun is held at a consistent distance from the surface and moved at a consistent speed.

Check all connections for tightness. Inspect the seals and replace if necessary. Check the air inlet connection.