Shopping.co.uk

JG Speedfit Reducing Pipe Tee - 22mm X 22mm X 15mm - Pkm3022Dwp

JG Speedfit Reducing Pipe Tee - 22mm X 22mm X 15mm - Pkm3022Dwp

Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fu...

Best current price£7.23from B&Q

Best offers

Shopping.co.uk recommended and popular offers

One Offer

1 offer from £7.23

View price history by clicking the chart icon.

B&QB&Q - Pkm3022Dwp White Push-Fit Reducing Pipe Tee (Dia)22mm X 22mm X 15mm
Free delivery in 1–3 days
£7.23
Visit shop

Product Information

Full details

This JG Speedfit Reducing Pipe Tee (Pkm3022Dwp) is designed for plumbers and DIY enthusiasts needing to connect three pipes of unequal sizes in plastic or copper plumbing systems. Its primary benefit is a significantly faster and simpler installation, reducing fitting time by up to 40% compared to traditional methods, while also eliminating the need for hot works. A key consideration is the requirement for relevant pipe inserts with all plastic pipes.

All features

Model Part NumberPkm3022Dwp
BrandJG Speedfit

Extended Product Information

FAQs

What is the maximum temperature and pressure rating for this fitting?

JG Speedfit push-fit fittings are generally rated for use with hot and cold water systems up to 10 bar pressure and temperatures up to 95°C, though specific system design should always be considered.

Do I need any special tools to install this fitting?

No, the fittings are designed for a tool-free installation. You will need pipe cutters to ensure a clean, square cut on the pipe ends.

Can I use this fitting with lead or steel pipes?

This fitting is designed for copper and JG Speedfit plastic pipes only. It is not compatible with lead or steel pipes.

How do I demount a connection made with this fitting?

To demount, unlock the plastic nut by twisting it counter-clockwise. Then, push the blue collet towards the body of the fitting while simultaneously pulling the pipe to release it.

What does 'reducing' mean in the product name?

It means the fitting connects pipes of different sizes. In this case, it connects two 22mm pipes to one 15mm pipe.

Is a pipe insert always necessary?

Yes, a pipe insert is mandatory for all plastic pipes to support the pipe and prevent deformation during connection and use. For copper pipes, inserts are not typically required unless the pipe is thin-walled or deformed.

Can this fitting be used for gas lines?

No, JG Speedfit push-fit fittings are intended for water applications only and are not certified or suitable for gas installations.

Troubleshooting

Connection leaks immediately after installation

Ensure the pipe is pushed fully into the fitting. Check that the pipe end is clean, square, and free from damage. For plastic pipes, verify the correct pipe insert is used and fully inserted. Try demounting and re-making the connection.

Pipe does not fully insert into the fitting

Check for obstructions inside the pipe end or fitting. Ensure the pipe is not deformed. For plastic pipes, confirm the correct insert is not preventing full insertion (though the insert should sit within the pipe).

Difficulty twisting the locking nut

Ensure the pipe is correctly seated within the fitting. Do not force the nut; if it's difficult, there might be an alignment issue. Release and re-attempt the connection.

Fitting appears cracked or damaged

Do not use a damaged fitting. Replace it with a new one and inspect the packaging for any signs of damage prior to installation.

Pros and Cons

Pros

  • Drastically reduces installation time and labor costs.
  • Eliminates the need for heat, making it safer and suitable for restricted spaces.
  • Simple push-fit mechanism for quick and secure connections.
  • Reliable and durable plastic construction.
  • Easy to demount and reposition if needed.
  • Versatile for connecting pipes of different sizes.

Cons

  • Requires specific pipe inserts for all plastic pipes.
  • May not be suitable for all types of plumbing applications without professional assessment.
  • The plastic nut can be overtightened if excessive force is applied.
  • Primarily designed for cold and hot water systems; verify suitability for other media.

Setup, Compatibility & Care

Setup:

  1. Ensure the pipe ends are clean, dry, and free from burrs. For plastic pipes, ensure they are cut square.
  2. For all plastic pipes, insert the appropriate manufacturer's pipe insert fully into the pipe end.
  3. Push the pipe or fittings firmly and squarely into the fitting until it is fully home.
  4. Twist the plastic nut clockwise firmly to lock the pipe in place.

Compatibility:

  • Compatible with copper pipe and JG Speedfit plastic pipes (e.g., PEX, PERT).
  • Not suitable for use with lead pipe.
  • Ensure the pipe conforms to the relevant standard (e.g., BS EN 1057 for copper, BS 7291 for plastic).
  • Always use the correct size pipe inserts with plastic pipes.

Care:

  • No regular maintenance is typically required.
  • Periodically check connections for any signs of damage or leaks, especially in hard-to-reach areas.
  • Avoid exposing the fitting to excessive heat or chemicals not suitable for plumbing systems.

Price History

DatePrice
Visit shop