Shopping.co.uk

Varilight 1-Gang 10A 3 Pole Fan Isolating Switch - Polished Copper

Varilight 1-Gang 10A 3 Pole Fan Isolating Switch - Polished Copper

Introducing the VARILIGHT URBAN collection, featuring dimmers, switches, and sockets in four styli...

Best current price£20.40from B&Q

Best offers

Shopping.co.uk recommended and popular offers

All Offers

2 offers from £20.40 - £25.10

View price history by clicking the chart icon.

B&QB&Q - Fan Isolator SwitchUrban Polished Copper With Black RockerXyfib.cu
Free delivery in 1–3 days
£20.40
Visit shop
eBaySwitch Copper Fan Isolating Rocker Urban Polished 10A 3 Pole Varilight XYFIB.CU
Free delivery in 1–3 days
£25.10
Visit shop

Product Information

Full details

This guide is for electricians and homeowners seeking a reliable and stylish fan isolating switch. The Varilight 1-Gang 10A 3 Pole Fan Isolating Switch in Polished Copper offers a decorative solution for controlling extractor fans, featuring a contemporary bevel-edge plate and triple pole switching. A potential caveat is that the Polished Copper finish, while beautiful, requires care to maintain its luster.

All features

BrandVarilight

Extended Product Information

FAQs

Is this switch suitable for controlling lights?

No, this is specifically designed as a fan isolating switch and is rated for fan loads. It is not suitable for direct control of lighting circuits.

Can I install this myself?

Due to electrical safety regulations, this switch must be installed by a qualified electrician.

What does '3 Pole Switching' mean?

Triple pole switching means the switch disconnects both the live and the neutral conductors of the circuit, providing a more complete isolation than single pole switches.

How do I clean the Polished Copper finish?

Dust regularly with a soft, dry cloth. For marks, use a slightly damp, soft cloth and dry immediately. Avoid all abrasive cleaners and polishes.

What is the warranty period?

Please refer to the product packaging or Varilight's official website for specific warranty details, as these can vary.

Does the Polished Copper finish require special maintenance?

It is finished with a protective lacquer to prevent tarnishing, but regular dusting and gentle cleaning with a soft cloth are recommended to maintain its appearance and prevent scratches.

What is the current rating of this switch?

The switch has a current rating of 10A.

Troubleshooting

Switch does not operate the fan

Ensure the power supply is on. Verify that the switch has been wired correctly by a qualified electrician, checking all connections to the fan and the mains supply.

Fan hums but does not spin

This may indicate an issue with the fan motor itself rather than the switch. Consult the fan's manufacturer or a qualified appliance repair technician.

Switch feels loose or wobbly

Check that the switch is securely fastened to the backbox and that the faceplate is properly tightened.

Polished Copper finish is tarnishing or dull

The protective lacquer should prevent this. If tarnishing occurs, it may indicate the lacquer has been compromised. Gently clean with a soft, damp cloth and dry thoroughly. Avoid abrasive cleaners.

Pros and Cons

Pros

  • Stylish Polished Copper finish adds a premium look.
  • Triple pole switching enhances electrical safety.
  • Protective lacquer minimizes maintenance needs for the finish.
  • Wide rocker ensures user-friendly operation.
  • Part of the URBAN collection, allowing for coordinated interior design.

Cons

  • Polished Copper finish may show fingerprints.
  • Requires specific care to maintain the polished look.
  • May be more expensive than basic plastic alternatives.
  • Installation requires electrical knowledge and should be performed by a qualified electrician.

Setup, Compatibility & Care

Setup:

This is a 10A, 3-pole fan isolating switch designed for mains voltage installations. It requires wiring by a qualified electrician in accordance with current IET wiring regulations.

  1. Isolate Power: Ensure the power supply to the circuit is completely switched off at the consumer unit before commencing any installation.
  2. Wiring: Connect the live and neutral wires from the fan circuit to the appropriate terminals on the switch. The triple pole design requires specific connection points for both conductors.
  3. Mounting: Secure the switch to a standard single-gang electrical backbox.
  4. Plate Installation: Attach the decorative faceplate.
  5. Restore Power: Once installation is complete and checked, restore power at the consumer unit.

Compatibility:

  • Voltage: Suitable for standard UK mains voltage (230V).
  • Load: Rated for 10A, suitable for most domestic extractor fans.
  • Backbox: Requires a standard single-gang electrical backbox (minimum depth recommended for ease of wiring).

Care:

  • Cleaning: Dust regularly with a soft, dry cloth. For fingerprints or smudges, use a slightly damp, soft cloth and dry immediately with a separate clean, dry cloth. Avoid abrasive cleaners or polishes, as they can damage the protective lacquer.
  • Avoid Harsh Chemicals: Do not use solvents or chemical cleaning agents on the finish.
  • Protect Finish: Avoid placing abrasive objects or materials directly onto the switch surface.

Price History

DatePrice
Visit shop