Best current price£672.34from B&Q
Shopping.co.uk recommended and popular offers
B&Q£672.34Visit shop B&Q - Evoco Bath Filler & Dual Thermostatic Mixer ShowerMatt Black 1.1967.010
Visit shop4 offers from £672.34 - £822.92
View price history by clicking the chart icon.
For homeowners seeking a luxurious and intuitive shower experience, the Mira Evoco Triple Outlet Thermostatic Shower Mixer in Matt Black offers sophisticated control and enhanced flow, even in low-pressure systems. While it elevates your bathroom's aesthetic and functionality, users should be aware of the need for compatible water systems to fully utilize its features.
| Model Part Number | 1.1967.010 |
|---|---|
| Brand | Mira |
Mira Magni-flo™ technology is designed to deliver up to three times more flow than standard mixer showers, even at low water pressures, enhancing the showering experience.
No, the Mira HydroGlo™ illumination is powered by the flow of water itself and requires no batteries or external wiring. It indicates when the shower has reached the optimal temperature.
Yes, the intuitive push-button controls allow you to select one, two, or all three outlets simultaneously. However, the performance and flow rate will depend on your home's water pressure and system capacity.
Yes, the Mira Cool Shield™ keeps the valve surface cool to the touch, and the thermostatic valve is factory set to a safe maximum temperature with an adjustable limit to prevent scalding.
The Mira Evoco is suitable for all water systems, including gravity-fed, pumped, unvented, and combination boiler systems, and is designed to work well even with low water pressure.
Clean the Matt Black finish with a soft, damp cloth. Avoid abrasive cleaners, as they can damage the surface. A mild, non-abrasive soap solution can be used for tougher marks, followed by rinsing.
The package includes the shower valve, a 250mm overhead drencher, an 110mm multi-mode handset, a 1.25m flexible hose, and an integrated designer bath filler.
Check that the water supply is turned on. Ensure there are no kinks in the flexible hose. Verify that the filters within the valve inlets are not blocked. If using multiple outlets, check system pressure and ensure it's sufficient for simultaneous use.
Adjust the maximum temperature stop on the thermostat (refer to installation guide). Ensure the hot water supply is adequate and the system is functioning correctly. The HydroGlo™ system may not activate if the temperature range is outside its operational parameters.
Ensure the controls are not obstructed. Check for any debris or limescale buildup around the buttons. If the issue persists, professional inspection may be required.
HydroGlo™ operates based on water flow and temperature. Ensure the shower is running and the water is within the activation temperature range (typically 35-45°C). No batteries or external power are required.
Cool Shield™ technology works by ensuring cold water circulates behind the valve surface. Performance can be affected by very high hot water temperatures or extremely low cold water flow. Ensure correct installation and water supply balance.
Setup: Installation of the Mira Evoco Triple Outlet Thermostatic Shower Mixer should be performed by a qualified plumber. Ensure all connections are made according to the provided manual and local plumbing regulations. The thermostatic valve is factory-set to a safe maximum temperature, but an adjustment screw allows for fine-tuning to your specific water system conditions. Ensure the correct inlets are connected to hot and cold water supplies.
Compatibility: This shower mixer is suitable for all water systems, including gravity-fed, pumped, unvented, and combination boiler systems. It is designed to operate effectively even at low water pressures due to Mira Magni-flo™ technology. Ensure your water system can supply adequate hot and cold water to the combined outlets if all are used simultaneously.
Care: To maintain the Matt Black finish, clean the mixer regularly with a soft, damp cloth. Avoid using abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the finish. For stubborn marks, use a mild, non-abrasive soap solution and rinse thoroughly. The rub-clean nozzles on the handset and overhead drencher can be cleaned by gently rubbing them with a finger or cloth to dislodge any limescale buildup.
