Inner Tube 24x2.10 Straight Schrader Valve - PetrolScooter - 39301
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This heavy-duty PetrolScooter inner tube is an ideal replacement for cyclists running 24-inch wheels who prioritize durability and ease of maintenance. Crafted from high-quality butyl rubber with a reinforced double-seam valve construction, it provides a reliable air seal for daily riding or utility use; however, ensure your specific rim width falls within the supported 1.75 to 2.125-inch tire range before installation.
All features
| Model Part Number | 39301 |
|---|---|
| Brand | PetrolScooter |
Extended Product Information
FAQs
Will this fit a 24 x 1.90 tire?
Yes, this tube is compatible with tires ranging from 24 x 1.75 to 24 x 2.125.
Does it come with a valve cap?
Yes, the tube includes a standard protective cap for the Schrader valve.
Can I use a floor pump to inflate this?
Absolutely, any standard bicycle floor pump or hand pump designed for Schrader valves will work.
What is the material of the tube?
The tube is made from high-quality butyl rubber, which is known for excellent air retention and reliability.
Is this tube suitable for road bikes?
It is intended for 24-inch wheels, which are common on youth bikes, cruisers, and some mountain bikes, rather than standard 700c road bike wheels.
Troubleshooting
Tube loses air shortly after installation
Check for 'pinch flats' caused by the tube getting caught under the tire bead during mounting. Also, inspect the tire casing for small embedded debris.
Valve does not fit through rim hole
Verify that your rim is drilled for a Schrader valve. If the hole is too small for a Schrader valve, it is designed for a Presta valve and will not accommodate this product.
Difficulty inflating to high pressure
Ensure the valve core is tightened securely using a valve core tool; a loose core can allow air to escape while pumping.
Pros and Cons
Pros
- Durable butyl rubber construction
- Easy inflation with standard automotive-style pumps
- Reinforced seam at the valve base for added longevity
- Versatile compatibility with common 24-inch tire sizes
Cons
- Not suitable for bikes with Presta valve rims without an adapter
- Heavier than lightweight racing-specific tubes
- Requires proper tire seating to avoid pinching during installation
Setup, Compatibility & Care
To install this tube, deflate your old tube completely and remove the tire from the rim. Before inserting the new PetrolScooter tube, run your fingers carefully along the inside of the tire casing to remove any thorns, glass, or debris that may have caused a previous flat. Check that your rim strip is covering the spoke holes to prevent punctures. To maintain the life of your tube, keep your tires inflated to the recommended PSI marked on your tire sidewall; under-inflation is the leading cause of pinch flats.