Best current price£46.00from eBay
Shopping.co.uk recommended and popular offers
eBay£46.00Visit shop Shimano Di2 E-Tube EW-JC130, Y-split Cable, 3 connectors - 550mm / 50mm / 550mm
Visit shop3 offers from £46.00 - £86.22
View price history by clicking the chart icon.
The Shimano E-tube EW-JC130 Y-split cable is designed for serious cyclists and technicians maintaining or upgrading Di2 electronic shifting systems. This component is essential for managing wire routing when connecting multiple cockpit or frame components, providing a clean and secure link within the E-tube ecosystem. While it offers excellent reliability and water resistance, installers should ensure their specific component configuration supports the required 550mm/50mm/550mm branch lengths before purchasing.
| Brand | SHIMANO |
|---|
The EW-JC130 is designed for the standard E-tube platform. Always verify your specific component group compatibility via the Shimano E-tube Project website.
You should use the Shimano TL-EW02 plug tool to safely insert and remove the connectors without damaging the cable head.
No, the cable sections are fixed at 550mm, 50mm, and 550mm. You must ensure these lengths are sufficient for your bike's frame size and handlebar geometry.
Yes, it is designed to work with both, though it is most commonly used for internal routing due to its durable construction.
You should feel a distinct 'click' when inserting the connector, and the rubber seal should be flush against the port housing.
Check that all three connectors are fully seated and clicked into place; double-check that the junction box recognizes the new component configuration via the E-tube software.
Inspect the cable for any kinks or crush damage and ensure the connector ports are clean and free of moisture or corrosion.
Installation requires the `TL-EW02` plug tool to push the connectors into the ports until they click; never pull on the wire itself to disconnect. When routing, ensure there are no sharp bends that could stress the internal conductors. This cable is compatible with all Shimano Di2 systems that utilize the standard E-tube interface. For maintenance, periodically check that the connector boots are fully seated to maintain the water-resistant seal. Keep the connectors clean of debris using a soft, dry cloth; do not use heavy degreasers near the connection points.
