Best current price£39.98from eBay
Shopping.co.uk recommended and popular offers
eBay£39.98Visit shop H7 / H18 OSRAM LEDriving HL EASY (2 bulbs) 64210DWESY-2HB LED Super Bright
Visit shopeBay£39.98Visit shop H7 / H18 OSRAM LEDriving HL EASY GEN2 (2 Bulb Pack) 64210DWESY2-2HB
Visit shop10 offers from £39.98 - £116.41
View price history by clicking the chart icon.
The Osram LEDriving Easy Gen2 H4/H19 is designed for drivers seeking enhanced visibility and a modern lighting upgrade for their vehicles. Its primary benefit is a significant increase in brightness (+120% over halogen) and a cool white light that mimics daylight for improved reaction times. A key caveat is that these bulbs do not have ECE approval and are strictly for off-road use, as public road use will void vehicle operating licenses and insurance coverage.
| Model Part Number | 64193DWESY2-2HB |
|---|---|
| Brand | Osram |
No, these Osram LEDriving Easy Gen2 bulbs do not have ECE approval and are not legal for use on public roads in exterior applications in most countries. Their use is restricted to off-road purposes only.
The color temperature is 6,500 K, which is classified as 'Cool White'. This mimics daylight, providing better contrast and visibility compared to warmer, yellowish halogen light, allowing drivers to see more clearly.
These LED bulbs offer up to 120% more brightness compared to standard halogen lamps, significantly improving illumination for better perception of the road ahead.
Yes, the bulbs are designed for plug-and-play installation, making them easy to replace standard H4 or H19 halogen bulbs. However, always ensure the vehicle is off and cool, and consult your vehicle manual if you encounter difficulties.
Using these bulbs on public roads will lead to the cancellation of your vehicle's operating license and loss of insurance coverage, as they do not meet road safety regulations.
The packaging is made from renewable materials, is plastic-free, and is designed to minimize environmental impact, aligning with sustainability practices.
Please contact your local distributor or relevant automotive authorities for specific information regarding the sale and use of non-approved lighting in your region.
Ensure the bulb is seated correctly in the socket. Check the vehicle's fuse for the headlight circuit. Verify the electrical connection is secure. If the issue persists, try the bulb in the other headlight socket to rule out a faulty bulb.
This can sometimes occur due to poor electrical contact or voltage fluctuations. Ensure the bulb connector is clean and firmly attached. Some vehicles may require a CANbus adapter to prevent flickering; consult a professional.
Check that the bulb's heat sink is not obstructed and has adequate airflow. Ensure the bulb is clean and the headlight lens is clear. Verify the power supply to the bulb is optimal.
While designed to be compact, some specific vehicle models may have very tight tolerances. Double-check the bulb's dimensions against your headlight housing specifications. Professional installation might be required to adapt or confirm fitment.
Setup: These LEDriving Easy Gen2 bulbs are designed for a plug-and-play installation, meaning they should directly replace your existing H4 or H19 halogen bulbs without the need for complex modifications. Ensure the vehicle's engine is turned off and the headlights are cool before attempting replacement.
Compatibility: While engineered for optimized compatibility with many car models, it is crucial to verify that your vehicle's headlight socket is designed for H4 or H19 bulbs. The ultra-compact design aids fitting into smaller headlight housings, but always consult your vehicle's manual or a professional if unsure.
Care: LED bulbs are generally maintenance-free. Avoid touching the glass part of the LED bulb with bare hands during installation, as oils can cause premature failure. If the bulbs become dirty, clean the exterior headlight lens as you normally would. Ensure the bulb's heat dissipation mechanism is not obstructed after installation.
