Shopping.co.uk

Orac LUXXUS Flexible Panel Moulding - P8020F

Orac LUXXUS Flexible Panel Moulding - P8020F

The Orac P8020F Flexible Panel Moulding is a versatile and stylish solution for interior design, f...

Best current price£67.40from OnBuy.com

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
OnBuy.com£67.40Visit shop

Orac Decor P8020f Luxxus Flexible Panel Moulding Cornice Stucco | 2 M 5414433039752

Visit shop

All Offers

2 offers from £67.40 - £226.23

View price history by clicking the chart icon.

OnBuy.comOrac Decor P8020f Luxxus Flexible Panel Moulding Cornice Stucco | 2 M 5414433039752
£24.95 delivery
£67.40
Visit shop
B&QB&Q - P8020F Flexible Premium Dado Moulding 3 Pack6 Metres
Free delivery in 1–3 days
£226.23
Visit shop

Product Information

Full details

The Orac P8020F Flexible Panel Moulding is an ideal choice for both DIY enthusiasts and professional renovators looking to add sophisticated, classic detailing to curved architectural features. Crafted from durable, lightweight Purotouch, this profile simplifies the process of decorating arches or rounded walls; however, users should note that it requires specific adhesives for installation and seamless jointing, necessitating a dedicated approach to ensure a professional finish.

All features

SeriesLUXXUS
Model Part NumberP8020F
BrandOrac

Extended Product Information

FAQs

Can I use this moulding outdoors?

No, the P8020F is designed specifically for interior use and is not rated for weather or UV exposure.

Is the material paintable?

Yes, the moulding arrives with a factory-applied undercoat and is ready for a final coat of high-quality paint.

What tools do I need for cutting?

A standard saw with a fine-toothed blade is sufficient for cutting Purotouch material.

Can I use standard wood glue for the joints?

No, you must use `FX210` jointing adhesive to ensure the joints chemically fuse and remain stable over time.

Does the moulding come in different lengths?

The P8020F is typically supplied in 2-meter lengths.

What is the minimum bending radius?

The minimum bending radius for the P8020F is 40 cm.

Troubleshooting

Moulding pulling away from the wall

Ensure that the substrate is primed and use mechanical fixings or masking tape to hold the moulding in place while the adhesive cures.

Visible seams between lengths

Apply an adequate amount of `FX210` jointing adhesive at the seams, then sand lightly once fully cured to achieve a seamless finish.

Moulding will not bend to the required curve

Check the radius requirement; if your architectural feature has a radius smaller than 40 cm, the P8020F is not compatible and may break if forced.

Pros and Cons

Pros

  • Excellent flexibility for curved surfaces
  • Lightweight and easy to handle
  • Factory-primed to save time during installation
  • Durable impact-resistant material
  • Suitable for DIY application

Cons

  • Requires specific Orac adhesives for best results
  • Limited to a 40 cm minimum bending radius
  • Not suitable for outdoor exposure
  • Requires careful planning for seamless jointing

Setup, Compatibility & Care

  1. Surface Preparation: Ensure the surface is clean, dry, and free of dust before starting installation.
  2. Adhesive Selection: Use `FDP500` for standard interior applications. For bathrooms or environments prone to moisture, select `FDP700` for superior moisture-resistant bonding.
  3. Jointing: Apply `FX210` jointing adhesive specifically to all butt ends and mitres to prevent hairline cracks over time.
  4. Cutting: Use a fine-toothed saw to cut the profile to your required lengths.
  5. Finishing: Once the adhesive has cured, you can apply your final coat of paint (acrylic or water-based) directly over the factory primer.
  6. Maintenance: Clean finished mouldings with a soft cloth and mild soap solution if necessary; avoid abrasive scrubbers.

Price History

DatePrice
Visit shop