Best current price£28.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£28.00Visit shop National Skirting White Vienna Primed Skirting Board 18Mm 170 X 3040Mm
Visit shop
B&Q£31.90Visit shop - National Skirting Vienna Mdf Skirting Board170mm X 18mm X 3040mmPrimedNo Rebate
Visit shop4 offers from £28.00 - £31.90
View price history by clicking the chart icon.
The National Skirting Vienna Skirting Board is an ideal choice for homeowners and renovation enthusiasts seeking a durable, professional finish for their wall-to-floor transitions. Crafted from moisture-resistant MDF, it offers a sturdy barrier against scuffs and impacts while providing a clean, elegant aesthetic that suits both modern and traditional decors. While it comes with a white primed finish, the main caveat is that it requires a final topcoat of paint or gloss to achieve the desired interior look and full moisture protection.
| Colour | White |
|---|---|
| Series | Vienna |
| Brand | National Skirting |
Yes, the moisture-resistant MDF makes them suitable for bathrooms, provided they are properly sealed with paint or gloss to prevent water ingress.
Standard wood or MDF-compatible water-based or oil-based gloss, satin, or eggshell paints are ideal.
No, the board comes pre-primed, so you can apply your topcoat directly.
Use a scarf joint (an angled cut) to blend the two boards together, which is less noticeable than a straight butt joint.
It is recommended to use both high-strength grab adhesive and nails for the most secure and long-lasting fit.
Check the wall for irregularities and use shims if necessary or apply more adhesive to bridge the gap.
Re-check your mitre saw calibration and ensure both pieces of the corner are cut at a perfect 45-degree angle.
To install, ensure your walls are clean, dry, and flat. Measure your perimeter carefully, accounting for corners, and cut the boards using a sharp fine-tooth saw or a mitre saw for precise angles. Apply a high-strength grab adhesive to the back of the board, pressing it firmly against the wall and securing it with nails or screws if necessary for extra stability. After installation, fill any nail holes with decorators caulk or filler and sand smooth. Finally, apply two coats of your chosen paint or gloss. To maintain, simply wipe clean with a soft, damp cloth; avoid abrasive cleaners that could damage the finish.
