Simpson Strong-Tie Restraint Strap - Silver - H06T10
Best current price£5.55from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£5.55Visit shop B&Q - H06T10 600 X 28 X 4mm H06T10
Visit shopB&Q£5.55Visit shop One Offer
1 offer from £5.55
View price history by clicking the chart icon.
Product Information
Full details
This Simpson Strong-Tie Restraint Strap (H06T10) is designed for builders and renovators needing to ensure secure lateral restraint for timber roof and floor systems connected to masonry walls. Its primary benefit is providing robust structural integrity in compliance with building standards. A key consideration is that it requires proper installation techniques to achieve its intended strength.
All features
| Colour | Silver |
|---|---|
| Model Part Number | H06T10 |
| Brand | Simpson Strong-Tie |
Extended Product Information
FAQs
What is the primary purpose of the H06T10 restraint strap?
The H06T10 is designed to provide lateral restraint, preventing timber roof trusses, rafters, and floor joints from moving horizontally away from masonry walls.
What materials is the restraint strap made from?
It is made from heavy-duty galvanised edge-coated steel for strength and corrosion resistance.
Does this strap comply with building regulations?
Yes, it is designed to meet The Building Regulations, BS5268 part 3, and other relevant building standards for horizontal restraint.
What are the dimensions of the restraint strap?
The strap measures 600mm in length, 28mm in width, and 4mm in thickness.
What fasteners should I use with this strap?
Fasteners and anchors must be selected based on the specific timber and masonry materials and in accordance with local building codes and regulations. These are not supplied with the strap.
Can this strap be used for vertical restraint?
This particular model (H06T10) is specifically designed for *horizontal* restraint. For vertical restraint, a different product or system may be required.
What is the finish on the steel?
The steel has a galvanised and edge-coated finish to enhance its durability and resistance to environmental factors.
Troubleshooting
Strap appears loose after installation
Ensure all fasteners (into timber and masonry) are fully tightened and appropriate for the materials. Check for any movement in the timber or masonry itself. Re-evaluate anchor type for masonry if necessary.
Difficulty achieving a secure connection to masonry
Verify that the correct type of masonry anchor or fixing method is being used for the specific masonry material (e.g., brick, block, concrete). Ensure pilot holes are correctly sized and drilled to the appropriate depth.
Corrosion observed on the strap surface
Inspect for damage to the galvanised and edge-coated finish sustained during installation. If minor, it may not impact structural integrity. For significant damage, consult with a structural engineer on potential protective coatings or replacement.
Pros and Cons
Pros
- Provides essential structural support for timber-to-masonry connections.
- Manufactured from durable, corrosion-resistant galvanised steel.
- Meets recognized building regulations and standards for safety and compliance.
- Suitable for both new construction and renovation projects.
- Robust dimensions ensure reliable performance under load.
Cons
- Requires specific installation knowledge to ensure effectiveness.
- Primarily designed for horizontal restraint; may not be suitable for all load types.
- The edge-coated finish, while protective, can be scratched during installation.
- The product itself does not include fasteners, which must be sourced separately.
Setup, Compatibility & Care
Setup:
- Placement: Position the strap to align with the intended connection point between the timber element (truss, rafter, joist) and the masonry wall.
- Attachment: Securely fasten the strap to the timber element using appropriate, code-compliant screws or nails. Ensure fasteners penetrate sufficiently into the timber.
- Masonry Fixing: Fix the other end of the strap into the masonry wall using suitable anchors or fixings as recommended by local building codes and the masonry type. The strap is designed to be tied into the masonry, often requiring pre-drilled holes and appropriate mechanical or chemical anchors.
Compatibility:
This restraint strap is designed for use with standard timber framing and masonry construction. Ensure that the chosen fasteners and anchors are compatible with both the timber and masonry materials being used, and adhere to local building regulations.
Care:
As the strap is made of galvanised, edge-coated steel, it offers good corrosion resistance. However, during installation, avoid excessive abrasion or damage to the coating. Once installed, no ongoing care is typically required as it is a structural component.