Best current price£39.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£39.99Visit shop Nes Home Chrome Deck Mounted Round Single Lever Basin Mono Tap With Waste
Visit shop
B&Q£44.99Visit shop B&Q - Chrome Deck Mounted Round Single Lever Basin Mono Tap With Waste
Visit shop8 offers from £39.99 - £50.00
View price history by clicking the chart icon.
The Nes Home Basin Mono Tap is designed for homeowners looking to upgrade their bathroom aesthetic with a sleek, modern, and durable fixture. Its primary benefit is a high-quality silver finish that adds sophistication to any basin, though users should note that the deck-mounted design requires a compatible sink configuration with a pre-drilled single-hole setup.
| Colour | Silver |
|---|---|
| Model Part Number | 4042871840688 |
| Brand | Nes Home |
Yes, this product includes the matching waste and necessary fitting accessories.
The tap is designed for standard domestic water pressures; please consult your plumber if you have a gravity-fed low-pressure system to ensure compatibility.
Use a soft, damp cloth with mild soap if needed. Always dry the tap with a soft cloth afterward to avoid water spotting.
This is a mono tap intended for a single-hole installation; you would need a basin blanking plate if your sink has three holes.
Generally, you will need an adjustable wrench, plumber's tape, and a basin wrench to tighten the nut in the confined space under the sink.
Check the aerator at the tip of the spout for debris or mineral buildup and rinse it thoroughly.
Verify that the mounting nut under the basin is tightened correctly and that the rubber O-ring is seated properly.
Ensure the supply lines are connected to the correct hot and cold valves and check that the lever cartridge is not obstructed.
To install this unit, ensure your basin is designed for a mono-bloc fitting with a single hole. Always turn off the main water supply before removing your old tap. Use the included fitting accessories to secure the base to the deck, ensuring the rubber seals are flush to prevent leaks. For care, avoid using abrasive cleaning pads or harsh chemicals that can scratch the silver finish. Simply wipe down the surface with a soft, damp cloth and dry it with a microfiber towel to prevent water spot accumulation and maintain the original shine.
