Best current price£30.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£30.00Visit shop B&Q - Mach-Blue 305mm Wood & Nails 6Tpi Universal Shank Reciprocating Saw Blade200323UkPack Of 2
Visit shop1 offer from £30.00
View price history by clicking the chart icon.
The Spyder Mach-Blue Reciprocating Saw Blade (305mm, 6TPI) is designed for professional contractors and serious DIY enthusiasts who require a heavy-duty cutting solution for mixed-material applications. Its primary benefit is the ability to cut through wood embedded with nails, steel, stainless steel, and plastics with minimal blade wear. While it excels at demolition and aggressive cutting tasks, users should note that the 6TPI configuration is optimized for speed and thick materials, which may result in a rougher finish compared to higher TPI finishing blades.
| Model Part Number | 200323Uk |
|---|---|
| Brand | Spyder |
Yes, the 6TPI design cuts through plastic and PVC efficiently, though the cut may require light sanding for a smooth finish.
It can cut through standard nails and mild steel, but extremely hardened alloy bolts may cause premature tooth wear.
The lower tooth count allows for larger gullets between teeth, which prevents clogging when cutting thick, soft materials like wood.
This blade fits all standard reciprocating saw tool-less blade clamps; however, ensure your saw has enough battery or power to drive a blade of this length through thick material.
Yes, but remember that longer, aggressive blades consume more battery power than shorter or finer-toothed blades.
Reduce pressure and ensure the saw shoe is firmly pressed against the material to stabilize the cut.
Apply consistent cutting oil when sawing through steel and verify that you are using the correct speed settings on your reciprocating saw.
Ensure the material is clamped securely; thin materials often vibrate when cut with low TPI blades like the 6TPI variant.
To ensure proper performance, insert the blade shank firmly into the reciprocating saw's tool-less blade clamp until it clicks or is secured by the locking mechanism. Always verify the blade is fully seated before activating the tool. For maintenance, clean the blade of resin and metal shavings after each use to prevent buildup that can cause overheating. Store the blades in a dry environment to prevent rust, particularly after cutting stainless or carbon steel, as residual metal dust can corrode if left on the blade surface. If the cutting speed slows noticeably, inspect the teeth for missing tips or significant dulling.
