Best current price£5.47from B&Q
Shopping.co.uk recommended and popular offers
B&Q£5.47Visit shop B&Q - 2 Pcs Of M10 HookEye Turnbuckle Tensioner For Wire Tension Garden Rope Hooks Cable Garden Support Wire Turnbuckle Strainer
Visit shop1 offer from £5.47
View price history by clicking the chart icon.
The SolaDirect M10 Hook - Eye Turnbuckle Tensioner is designed for users who need precise tension adjustment in rigging, cable systems, or structural bracing. Its primary benefit is the dual-threaded mechanism, allowing for simultaneous tightening or loosening of connected components from a single point. A potential caveat is that it requires careful alignment of the right and left-hand threads to function correctly.
| Brand | SolaDirect |
|---|
'M10' refers to the metric thread size, indicating a nominal diameter of 10 millimeters for the screw threads.
Rotating the central body clockwise typically tightens the turnbuckle, bringing the hook and eye ends closer together. Rotating counter-clockwise loosens it, moving the ends further apart.
This turnbuckle is designed for tensioning and bracing, not primarily for lifting. Always consult load ratings and engineering specifications for lifting applications to ensure safety.
The combination of right and left-hand threads allows the turnbuckle to adjust the length (and thus tension) by rotating the central body in one direction, rather than needing to turn the entire assembly.
Inspection frequency depends on the application and environmental conditions. For critical applications or those exposed to weather, inspect before each use or at regular intervals (e.g., monthly).
You can use a wrench on the hexagonal part of the body or insert a suitable tool into the transverse hole for adjustment.
Ensure the right and left-hand threads are properly aligned. Clean any debris from the threads and apply a light lubricant. If the issue persists, the unit may be overloaded or damaged.
Check that you are using an M10 threaded anchor point. Ensure the anchor point is clean and free from damage. Verify that the hook or eyelet is not bent or obstructed.
Clean the affected area with a wire brush and apply a rust inhibitor or a light coating of oil. For significant corrosion, consider replacement to maintain safety and performance.
Setup: To set up the turnbuckle, thread the hook end into one anchor point and the eye end into another. Ensure that the connections are secure. To adjust tension, insert an appropriate tool (e.g., wrench on the hexagon, or screwdriver in the transverse hole) into the center of the turnbuckle. Rotate the body clockwise to tighten (shorten the distance between ends) or counter-clockwise to loosen (lengthen the distance between ends).
Compatibility: This turnbuckle features M10 threads on both ends and a central adjustment mechanism. It is compatible with other M10 threaded components, eye bolts, hooks, and clevis pins that match the M10 standard.
Care: Keep the turnbuckle clean and free of debris. Periodically inspect for signs of wear, corrosion, or damage. Apply a light lubricant to the threads if stiffness is encountered, especially after exposure to harsh environments. Store in a dry place when not in use.
