Motorex Carbon Paste - 850 g
Best current price£219.99from Evans Cycles UK
Best offers
Shopping.co.uk recommended and popular offers
Evans Cycles UK£219.99Visit shop Motorex Carbon Paste Silver
Visit shopEvans Cycles UK£219.99Visit shop One Offer
1 offer from £219.99
View price history by clicking the chart icon.
Product Information
Full details
Motorex Carbon Paste is a high-performance mounting compound engineered for cyclists and mechanics working with carbon and aluminum components like seat posts, stems, and pedals. Its primary benefit is the reduction of required tightening torque by up to 30 percent, which helps prevent over-tightening and structural damage to delicate carbon fiber parts. While it is an essential maintenance tool for preventing seized components and ensuring secure assembly, the large 850g container is best suited for professional workshops or heavy-duty riders rather than casual home mechanics.
All features
| Model Part Number | MOT304856 |
|---|---|
| Brand | Motorex |
Extended Product Information
FAQs
Can I use this on steel parts?
While designed for carbon and aluminum, it can be used on steel parts to prevent seizing, though standard anti-seize is often preferred for threaded metal-on-metal connections.
Does this paste replace bearing grease?
No. This is a friction-enhancing compound and should never be used inside bearings as it will cause them to bind and wear prematurely.
Is 850g too much for a home mechanic?
Yes, for a single bike owner, an 850g container will last for many years. It is specifically sized for workshop usage.
How often should I re-apply the paste?
Re-apply whenever you remove a component for maintenance or if you notice the component beginning to slip.
Will this scratch my frame?
No, the fibers are non-abrasive and specifically engineered to increase grip without damaging the surface of carbon fiber.
Troubleshooting
Component is still slipping after application
Thoroughly clean the surface with isopropyl alcohol to remove old oils, then re-apply a fresh, even layer of paste.
Excessive paste build-up around the junction
Wipe the area clean with a shop towel; leaving excess paste will collect dirt and grit over time.
Pros and Cons
Pros
- Significantly lowers torque requirements to prevent part failure
- Prevents seized bolts and stuck seat posts
- Protects carbon fiber surfaces from scratches and structural damage
- Easy to apply with a consistent, reliable texture
Cons
- The 850g container is overkill for occasional home users
- Requires careful cleaning if excess paste escapes the joint
- Not intended for use as a high-speed bearing grease
Setup, Compatibility & Care
To apply the paste effectively, first ensure that the mating surfaces are clean, dry, and free of old grease or dirt. Apply a thin, even layer of Motorex Carbon Paste to the component using a lint-free cloth or a small brush. Once the component is inserted, wipe away any excess material that has squeezed out from the joint to prevent debris from sticking to the exterior.
This product is fully compatible with all carbon fiber and aluminum bicycle components. It should not be used inside high-speed sealed bearings, as it is a friction-generating compound, not a lubricant. Store the 850g container in a cool, dry place with the lid tightly sealed to prevent the paste from drying out or becoming contaminated with grit.