XL Joinery Internal Verona White Primed Door 2040 x 926 x 40mm


Best current price£64.97from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£64.97Visit shop B&Q - Internal Verona White Primed Door 2040 X 926 X 40mm
Visit shop

Best current price£64.97from B&Q
Shopping.co.uk recommended and popular offers
B&Q£64.97Visit shop B&Q - Internal Verona White Primed Door 2040 X 926 X 40mm
Visit shop25 offers from £64.97 - £204.97
View price history by clicking the chart icon.
The XL Joinery Internal Verona White Primed Door is designed for homeowners seeking a versatile internal door with a distinctive arched top and deep u-grooves. Its key benefit lies in its ability to complement both contemporary and traditional interiors, offering a seamless aesthetic. A potential caveat is that while this is a white primed door, it will require a final coat of paint to achieve the desired finish and full protection.
| Colour | White |
|---|---|
| Model Part Number | WPVER926 |
| Brand | XL Joinery |
The product description does not specify if the door is solid or hollow core, but its 40mm thickness suggests a substantial construction.
This particular XL Joinery Internal Verona door measures 2040mm in height, 926mm in width, and 40mm in thickness.
No, hardware such as handles, hinges, and locks are not included and must be purchased separately.
Yes, the door can be trimmed to fit smaller openings. However, it is advisable to check the product's specific trimming allowance and to avoid altering the arched design or deep grooves significantly.
Ensure the door is clean and dust-free. Apply a quality primer if needed, followed by at least two topcoats of your chosen paint, applying thin, even coats and allowing proper drying time between applications.
Yes, XL Joinery offers matching glazed doors, fire doors, and an oak veneer version of the Verona door, allowing for design continuity throughout a property.
No, this is an internal door and is not designed or rated for external use.
Check the door frame for plumb and level. Ensure hinges are correctly installed and aligned. Minor adjustments to hinge position or door trimming may be necessary.
Ensure the surface was clean and dust-free before painting. Apply thin, even coats, allowing adequate drying time between them. Sand lightly with fine-grit sandpaper between coats if needed.
Identify the sticking point. If minor, carefully trim the edge of the door with a hand plane or power planer. Ensure the frame is not warped and hinges are correctly set.
Lightly sand the affected area with fine-grit sandpaper and re-apply primer followed by your topcoat. Ensure good lighting when painting to spot imperfections.
Setup:
This door is supplied primed and ready for finishing. Before hanging, ensure the door is clean and free from dust. Apply your chosen paint finish according to the paint manufacturer's instructions, ensuring all edges and surfaces are covered for maximum protection. Allow adequate drying time between coats. Always check the door for squareness and suitability before trimming.
Compatibility:
This door is designed for standard internal door frames. It is crucial to measure your existing opening accurately before purchase to ensure the correct size is selected. While trimming is possible, significant adjustments to the arch or shape are not recommended. The door is compatible with most standard internal door hardware, including hinges, handles, and mortice locks. Ensure any hardware chosen complements the door's style.
Care:
Keep the door clean by wiping it down with a slightly damp, soft cloth. Avoid using abrasive cleaners or excessive moisture, as this can damage the primed finish or the door material. For painted surfaces, use a mild soap and water solution if necessary, and dry thoroughly. Protect the door from direct sunlight and extreme temperature fluctuations, which can cause the material to expand or contract.