Dart Router Cutter - 1/2in x 32mm
Best current price£12.37from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£12.37Visit shop B&Q - Dar381 Router Cutter Drill Bit
Visit shopB&Q£12.37Visit shop One Offer
1 offer from £12.37
View price history by clicking the chart icon.
Product Information
Full details
The DART 1/2 Inch x 32mm Router Cutter is a professional-grade TCT tool designed for tradesmen and serious DIY enthusiasts who require fast, precise cuts in timber and hard plastics. Its tungsten end tip makes it exceptionally versatile for plunging tasks, while the PTFE coating ensures smooth operation by preventing resin buildup. While this cutter delivers a superior finish on high-quality laminates, users should ensure their router setup is compatible with a 1/2-inch shank to fully utilize its robust cutting capacity.
All features
| Model Part Number | Dar381 |
|---|---|
| Brand | DART |
Extended Product Information
FAQs
Can this cutter be used with a 1/4-inch router collet?
No, this specific model requires a 1/2-inch router collet for safe and proper operation.
Is this tool suitable for metal cutting?
No, this is designed for timber and hard plastics only. Using it on metal will destroy the carbide edges immediately.
What is the primary benefit of the PTFE coating?
The coating reduces friction, which minimizes heat buildup and prevents resin from sticking to the bit.
Can I use this for plunge cutting?
Yes, the tungsten end tip is specifically designed to allow for safe and effective plunge cuts.
How deep can I cut in a single pass?
The cutter has a working length of 3.2 cm; however, for very hard materials, it is recommended to make multiple shallower passes to achieve a clean result.
Troubleshooting
Excessive vibration during operation
Check that the bit is seated correctly in the collet and that the shank is not damaged or dirty.
Burning marks on the timber edge
Ensure your feed rate is consistent; moving too slowly allows the cutter to rub and heat the material.
Poor cut finish or chipping
Check the sharpness of the tungsten tips and ensure the material is securely clamped to the workbench.
Pros and Cons
Pros
- Excellent for plunge cutting due to the tungsten end tip
- PTFE coating reduces friction and heat buildup during use
- Produces a clean, professional finish on high-quality laminates
- Highly durable construction ideal for frequent use
Cons
- Requires a router capable of accepting a 1/2-inch shank
- Not suitable for materials harder than specified plastics and timber
- Limited to specific 32mm depth capacity
Setup, Compatibility & Care
Ensure that your router is equipped with a 1/2-inch collet before attempting to install the DART cutter. Insert the shank fully into the collet, then withdraw it by approximately 2-3mm to prevent bottoming out before tightening the nut firmly.
To prolong the life of your cutter:
- Cleaning: After use, wipe the cutter with a resin-removing solvent to keep the PTFE coating effective.
- Storage: Store the bit in its protective packaging or a dedicated rack to prevent damage to the carbide tips.
- Inspection: Periodically check for signs of dulling or chips in the tungsten tip. Using a dull bit can lead to poor finishes and increased heat, which may damage the workpiece.