Ball Valve with Strainer and Handle - Invena
Best current price£30.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£30.99Visit shop B&Q - 3/4 Inch Water Flow Rate Ball Valve With Strainer Female
Visit shopB&Q£30.99Visit shop One Offer
1 offer from £30.99
View price history by clicking the chart icon.
B&QB&Q - 3/4 Inch Water Flow Rate Ball Valve With Strainer Female
Free delivery in 1–3 days
£30.99
Visit shop
Product Information
Full details
This Invena ball valve with a built-in strainer and handle is ideal for plumbing professionals and DIY enthusiasts needing a reliable shut-off solution for water or heating systems. Its primary benefit is providing secure flow control while simultaneously filtering debris. A potential consideration is its specific thread type, requiring compatibility with 3/4" BSP connections. Key features include a robust design, integrated strainer, easy-to-use handle, and suitability for moderate temperatures and pressures.
All features
| Brand | Invena |
|---|
Extended Product Information
FAQs
What is the maximum pressure this valve can handle?
The valve has a maximum working pressure of 1.6 MPa (approximately 232 PSI).
What is the thread size and type?
It features a 3/4" BSP (British Standard Pipe) female x female thread type.
Can this valve be used for gas lines?
No, this valve is specifically designed for use in water or heating systems only.
How often should the strainer be cleaned?
The cleaning frequency depends on water quality and system usage. It is recommended to check and clean the strainer during routine system maintenance or if reduced flow is observed.
What is the maximum temperature for this ball valve?
The maximum working temperature for this valve is 90°C (194°F).
Is this valve suitable for outdoor use?
While durable, prolonged exposure to harsh outdoor elements without protection might affect its lifespan. Ensure it is installed in a protected environment if used outdoors.
Troubleshooting
Valve is leaking from the connection.
Ensure the 3/4" BSP threads are properly aligned and tightened. Check for damaged threads on the pipe or valve. Consider using appropriate thread sealant tape or compound.
Water flow is significantly reduced.
The integrated strainer may be clogged. Shut off the water supply and clean the strainer element thoroughly.
Handle is stiff or difficult to turn.
The valve may have sediment buildup or be overtightened. Attempt to clean the valve mechanism internally if possible, or ensure it is correctly seated and not binding against other components.
Valve does not fully shut off the flow.
Internal seals may be damaged or worn. Inspect for debris obstructing the ball or seats. If damage is suspected, replacement of the valve may be necessary.
Pros and Cons
Pros
- Provides both flow control and filtration in a single unit.
- Easy to operate with its lever handle.
- Simple to install due to standard BSP threading.
- Durable design for typical residential or commercial system use.
Cons
- Limited to 3/4" BSP thread size; not universally compatible.
- Maximum temperature and pressure ratings should be observed to prevent failure.
- Strainer requires periodic cleaning to maintain optimal performance.
Setup, Compatibility & Care
Setup: Ensure the system is depressurized and drained before installation. Screw the valve onto the existing 3/4" BSP threaded pipework, ensuring a secure, leak-free connection. Hand-tighten first, then use an appropriate wrench for a final snug fit, being careful not to overtighten. The handle should be oriented for easy operation.
Compatibility: This valve is designed for 3/4" BSP (British Standard Pipe) female threaded connections. Verify that your existing pipework uses this standard. It is suitable for cold and hot water systems, as well as standard heating systems operating within its specified temperature and pressure limits.
Care: Periodically inspect the valve for leaks. The integrated strainer requires cleaning to prevent clogging. To clean, shut off the water supply, unscrew the valve body (if designed for disassembly, otherwise access may be limited), remove the strainer, clean it thoroughly under running water, and reassemble. Consult the manufacturer's specific instructions if available for detailed cleaning procedures.