Erbauer 240V 600W Multi-Purpose Airless Paint Sprayer - Eaps600

The Eaps600 is compatible with oil and water-based paints, varnishes, stains, and wood preservatives.

After each use, flush the system with the appropriate solvent or water, depending on the paint type. Clean the nozzle and filter thoroughly.

Adjust the nozzle to change the spray pattern. Experiment with the pattern on a piece of cardboard to get the desired result.

Clean the nozzle and filter immediately. Use a brush to remove any dried paint. Disassemble and clean the parts if necessary.

Refer to the paint manufacturer's instructions for the correct thinning ratio. Use the recommended thinner for the paint type.

The sprayer comes with a cleaning brush, 3 spanners, and a screw set for the base stand.

Always wear appropriate personal protective equipment (PPE), including eye protection, gloves, and a respirator. Work in a well-ventilated area.

Check the power supply and ensure the power cord is properly connected. Check the fuse.

Clean the nozzle and filter to remove any blockages. Ensure the paint is properly thinned according to the manufacturer's instructions. Check for air leaks.

Adjust the spray pressure and nozzle settings. Maintain a consistent distance and speed while spraying.

Check the hose connections and tighten if necessary. Inspect the seals and replace if damaged.