Shires Brass Alloy Bevel Bit with Lozenge - Bronze

The brass alloy lozenge is designed to warm up quickly in the horse's mouth, which encourages salivation. This increased moisture helps the horse soften its jaw and accept the bit more readily.

Mild leverage indicates that the bit applies a gentle turning or lifting action on the bit rings when rein pressure is applied. It offers more control than a purely 'direct action' bit like a snaffle, but is less severe than bits with significant leverage.

Bit sizing is typically measured in inches, from the inside of one ring to the inside of the other. You should be able to see one small crease on either side of the horse's mouth when the bit is in place. Common sizes are 4.5", 5", and 5.5".

This is a mild leverage bit. While it offers more control than a snaffle, it may not provide sufficient leverage for very strong or "pulling" horses. It is generally best suited for horses that respond well to subtle aids.

After every use, rinse the bit with water. The brass alloy lozenge may benefit from a more thorough cleaning with a specialized cleaner periodically to maintain its appearance and salivation-promoting properties.

For the 4.5" and 5" sizes, the cheek height is 55mm. For the 5.5" size, the cheek height is 70mm.

Yes, this bit is compatible with standard English-style bridles that have cheekpieces designed for a double-jointed or pelham bit.

Ensure the bit is clean and free of debris. The brass alloy lozenge is designed to encourage salivation; check if it's clean and able to warm effectively. Verify the bit size and fit are correct.

Clean the bit thoroughly with water. For the brass alloy sections, use a mild brass polish or a dedicated bit cleaner. Ensure it is rinsed well and dried completely after cleaning.

Check the bit for any rough edges or damage. Ensure the bit is the correct size and not pinching the horse's cheeks or tongue. Consult with a professional if discomfort persists.