Best current price£16.99from eBay
Shopping.co.uk recommended and popular offers
eBay£16.99Visit shop Hycote Spray Paint Vauxhall Star Silver III Metallic 150ml + Primer & Lacquer
Visit shop3 offers from £16.99 - £17.99
View price history by clicking the chart icon.
This Hycote spray paint kit is designed for automotive enthusiasts and DIYers seeking a durable, factory-match finish for Vauxhall vehicles. Its key benefit is providing a high-quality, metallic silver paint, primer, and lacquer system in convenient 150ml aerosol cans that deliver the coverage of larger cans. A potential caveat is the need for proper surface preparation to achieve optimal adhesion and finish.
| Colour | Silver |
|---|---|
| Model Part Number | HYCPPLKIT160 |
| Brand | Motor World |
| Container Volume | 150ml |
Apply the base coat in several light, even coats, allowing adequate drying time between each. Usually, 2-3 light coats are sufficient for good coverage. Follow with 1-2 light coats of lacquer.
While the primer offers excellent adhesion, it is recommended to use a plastic primer specifically designed for automotive plastics before applying this paint system for best results on plastic components.
Drying times vary depending on temperature and humidity. Generally, allow 10-15 minutes flash-off time between base coats and 30-60 minutes before applying the lacquer. Refer to the can instructions for specific guidance.
This kit is best suited for minor cosmetic repairs and touch-ups. For areas with extensive body filler, it is advisable to use a primer specifically designed for use with body fillers and ensure a smooth, level surface before applying the color coat.
When applied correctly over a primed surface and protected by the lacquer, the paint offers excellent resistance to sunlight and fading, providing a durable finish that should last for several years under normal conditions.
The compressed aerosol technology in these 150ml cans provides coverage equivalent to conventional 300ml aerosols, making them efficient for small to medium-sized repairs.
Ensure consistent distance and speed when spraying. Apply in light, even coats rather than attempting to cover in one go. Overlapping each pass by approximately 50% can help.
The paint was likely applied too thickly or too close to the surface. Allow the area to dry, then lightly sand and reapply in thinner coats from a greater distance.
Turn the can upside down and spray briefly to clear the nozzle. If still clogged, carefully remove the nozzle and soak it in a suitable solvent, then rinse and reattach. Ensure the can was properly cleared after the last use.
The surface was not properly prepared or cleaned before application. Ensure the surface is free from grease, wax, and is adequately primed. Re-sanding and re-priming may be necessary.
Setup:
Compatibility:
Care:
