Polypipe 110mm Soil 135 Degree Offset Bend - SB403B

This component is designed for the Polypipe PolySoil system, but it is generally compatible with other standard 110mm diameter PVC soil pipe systems.

This product is part of the PolySoil range, which is primarily intended for soil and vent (above-ground) applications. Use dedicated underground drainage pipes for buried installations.

The 135-degree angle (often called a 45-degree offset) provides a gentle directional change that reduces friction and the likelihood of waste blockages compared to sharp 90-degree bends.

You can choose between ring seal or solvent weld installation. If you choose solvent weld, you must use a compatible PVC pipe cement.

Occasional visual checks for leaks during routine plumbing maintenance are sufficient. Avoid using harsh chemical drain cleaners that could damage the PVC material over time.

Ensure the pipe is inserted fully into the socket. If using a ring seal, verify the rubber gasket is seated correctly and has not been displaced.

Check the pipe for burrs or debris. Use a chamfering tool on the pipe edge and apply a suitable lubricant if using a ring seal connection.

Clean both the pipe surface and the socket interior with a degreasing agent before applying the solvent cement. Ensure both pieces are held firmly in place until the bond sets.