Hycote Colour Touch Up Brush Paint - Silver - 12.5ml

This Hycote Touch Up Brush Paint is suitable for use on metals, plastics, wood, and ceramics.

Yes, the paints are compatible with OEM finishes, and also suitable for both acrylic and cellulosic finishes.

The paint is fast drying. Expect it to be touch dry in approximately 15-20 minutes, but allow more time before applying subsequent coats or lacquer.

This paint is best suited for touching up minor scratches and stone chips. For deeper damage, multiple applications might be needed, or professional repair may be more appropriate.

Hycote color brushes have been matched to over 100 specific manufacturers and models. Ensure you select the correct paint code for your vehicle. Remember that original paint may have faded over time, which can affect the exact match.

For a durable and glossy finish, it is recommended to apply a compatible lacquer (sold separately) once the colour coat has fully dried.

Store the paint in a cool, dry place away from direct sunlight and extreme temperatures. Make sure the cap is tightly sealed after each use.

Ensure the can was shaken sufficiently. Clean the brush tip with a suitable solvent if dried. If the ball bearings are stuck, shake more vigorously.

Apply paint in thin, even coats. Avoid overloading the brush. Practice on a scrap surface first. Lightly sand and reapply if necessary.

Ensure you have the correct paint code for your vehicle. Note that older paint may have faded, so a perfect match can be challenging. Consider a primer and lacquer for better integration.

Shake the can more or less vigorously as needed. If too thick, consider adding a small amount of appropriate thinner (consult manufacturer recommendations). If too thin, apply multiple thin coats.