Best current price£13.61from Bradfords
Shopping.co.uk recommended and popular offers
Bradfords£13.61Visit shop Polypipe 112mm Half Round Stop End Outlet in Grey RR106G for Rainwater Gutter Systems
Visit shop2 offers from £13.61 - £17.99
View price history by clicking the chart icon.
The Polypipe RR106G Stop End Outlet in Grey is designed for homeowners and light commercial property owners seeking a durable and aesthetically pleasing solution for managing rainwater. Its primary benefit is providing a clean and secure termination point for 112mm half-round guttering systems, ensuring efficient water management and preventing leaks. A key consideration is its specific compatibility with Polypipe's 112mm Half Round Rainwater System and 68mm Round Downpipe system.
| Model Part Number | RR106G |
|---|---|
| Brand | Polypipe |
The RR106G is designed specifically for 112mm half-round guttering systems manufactured by Polypipe.
This model, RR106G, is supplied in a grey finish.
It is recommended to use this stop end outlet only with Polypipe's 112mm half-round guttering to ensure a proper and secure fit.
Clean with a soft brush or damp cloth. Avoid abrasive cleaners or solvents.
No, this is a stop end outlet only. It is designed to terminate a gutter run and direct water towards a separate downpipe.
The stop end outlet is manufactured from durable PVCu (Polyvinyl Chloride).
The dimensions are approximately H:28.0 x W:58.0 x D:123.0 cm, with a weight of 0.2 kg.
Ensure you are using a Polypipe 112mm half-round gutter. Check for any obstructions or damage on the end of the gutter or inside the stop end outlet. Try re-aligning and pushing firmly.
Verify the stop end outlet is fully seated on the gutter. If the seal is compromised, a small application of PVCu-compatible gutter sealant may be required. Check for any cracks or damage to the outlet itself.
While PVCu is UV resistant, prolonged extreme exposure can cause minor fading over many years. Ensure no harsh chemicals were used for cleaning. Performance should not be affected.
Setup: The RR106G Stop End Outlet is designed for simple push-fit installation onto the end of a Polypipe 112mm half-round gutter section. Ensure the gutter end is clean and free from debris. Apply a small amount of solvent-free gutter sealant to the inside of the stop end outlet if an extra secure seal is desired, though it is often not necessary with a proper fit. Slide the stop end outlet firmly onto the gutter end until it is fully seated.
Compatibility: This product is specifically designed for use with Polypipe's 112mm Half Round Rainwater Gutters. It is also intended to connect to Polypipe's 68mm Round Downpipe system using the appropriate adapter or connecting piece if required by the specific downpipe configuration.
Care: Clean the outlet periodically with a soft brush or damp cloth to remove leaves, moss, or other debris that could cause blockages. Avoid using abrasive cleaners or solvents, as these can damage the PVCu material. Check the seal annually to ensure it remains secure and watertight.
