Best current price£9.99from eBay
Shopping.co.uk recommended and popular offers
eBay£9.99Visit shop FTX Mauler Outback Fury High Torque 540 20T Motor Brushed FTX8802 3.2mm bore
Visit shop4 offers from £9.99 - £14.98
View price history by clicking the chart icon.
The FTX Mauler High Torque 540 20T Motor is designed for RC enthusiasts seeking enhanced power and performance. Its primary benefit is delivering high torque for superior acceleration and climbing, ideal for demanding RC vehicle applications. A potential caveat is its high power draw, which may require attention to battery and ESC compatibility. This motor features a robust construction and a 20-turn brushed design optimized for strength and durability.
| Model Part Number | FTX8802 |
|---|---|
| Brand | FTX |
This motor is typically designed for use with 7.2V NiMH or 2S LiPo batteries. Always ensure your ESC can handle the chosen battery type and voltage.
Yes, you will need an ESC that is compatible with brushed motors and rated to handle the current draw of this high-torque motor. Check the ESC's specifications to ensure it exceeds the motor's requirements.
The '20T' refers to the number of turns in the motor windings. Fewer turns generally mean higher speed but less torque, while more turns (like 20T) typically provide more torque at lower RPMs, which is ideal for climbing and acceleration.
While it's a standard 540 size, compatibility depends on your specific RC car's chassis, available space, and ESC rating. Always check your vehicle's manual and motor dimensions.
Brushed motors generally do not require a specific break-in procedure beyond careful initial use. Ensure smooth operation and avoid pushing the motor too hard during the first few runs while monitoring temperatures.
Please refer to the product packaging or the manufacturer's official website for specific warranty information, as it can vary.
Check all electrical connections to the ESC and receiver. Verify battery is charged and connected properly. Ensure the ESC is compatible with the motor and is powered on. Check motor brushes for wear or damage.
Review your gear ratio; a higher gear ratio (smaller pinion or larger spur) might be needed. Reduce driving time or allow for cooldown periods. Ensure the motor is clean and free of debris. Verify ESC settings are appropriate for the motor.
Check battery charge level. Inspect motor brushes and commutator for dirt or wear. Ensure all connections are secure and clean. Verify gear mesh is not too tight. Check ESC settings and ensure it's not set to a 'blinky' mode if it has that feature and it's not intended.
Inspect for foreign objects inside the motor or cooling fins. Check ball bearings for wear or damage. Ensure the motor is securely mounted and gears are properly meshed.
Setup: Ensure the motor is securely mounted in your RC vehicle's chassis. Connect the motor wires to your Electronic Speed Controller (ESC) terminals, observing the correct polarity. Proper gear mesh between the motor pinion and spur gear is crucial; too tight can cause binding, too loose can strip teeth.
Compatibility: This 540-size motor is generally compatible with most RC car kits designed for this motor size. However, always verify that your ESC is rated for the motor's current draw and voltage to prevent damage. A 20T brushed motor typically pairs well with LiPo batteries (e.g., 2S) and requires an ESC capable of handling brushed motors. Check your vehicle's manual for specific recommendations.
Care: To maintain optimal performance, regularly clean dust and debris from the motor vents. Periodically check and re-grease the motor's ball bearings if accessible. Monitor motor temperature during operation; if it becomes excessively hot, adjust gearing or driving style. Ensure connections remain clean and secure.
