Best current price£45.69from B&Q
Shopping.co.uk recommended and popular offers
B&Q£45.69Visit shop B&Q - Eezibleed Brake Bleeding Clutch Bleed Kit Automatic One Man By Gunson Lsr40
Visit shop2 offers from £45.69
View price history by clicking the chart icon.
The Gunson LSR40 Eezibleed kit is designed for DIY mechanics and car enthusiasts who need to bleed hydraulic brakes and clutches efficiently and independently. Its key benefit is enabling a single person to perform brake bleeding without assistance, saving time and effort. A potential caveat is the need for compatible spare tire pressures, and that while common screw caps are included, universal adapters might be required for some vehicles. This kit uses a spare tire to pressurize the system, forcing new fluid through and expelling old fluid and air.
| Model Part Number | LSR40 |
|---|---|
| Brand | Gunson |
Yes, the Gunson Eezibleed is suitable for use on vehicles with ABS systems. The pressurized method helps ensure a thorough bleed.
Typically, around 15-20 PSI is recommended. Always refer to the specific instructions provided with the kit or your vehicle's service manual for the most accurate pressure.
The kit includes caps for common vehicles. If none of the supplied caps fit your master cylinder, you will need to purchase compatible universal adapters separately.
Rinse the reservoir and hoses with clean brake fluid or a suitable solvent to remove residue. Wipe dry with a clean cloth and store in a dry location.
It is best to perform the bleeding process efficiently and not leave the system under pressure for longer than necessary. Monitor the process closely and release pressure once bleeding is complete.
Yes, the Eezibleed kit is designed for bleeding both hydraulic brake and clutch systems.
Always use the brake fluid type recommended by your vehicle manufacturer. Common types include DOT 3, DOT 4, and DOT 5.1. Check your vehicle's manual.
Check that the spare tire is adequately inflated. Ensure all connections between the tire, Eezibleed reservoir, and master cylinder are tight and free from leaks. Verify the correct cap or adapter is securely fitted.
Ensure the correct cap or adapter is being used for your vehicle's master cylinder. Check the cap's seal for damage and ensure it is firmly seated. If necessary, use a universal adapter.
Ensure the master cylinder reservoir does not run dry during the process; refill as needed. Double-check all connections for leaks. If the problem persists, re-bleed the system, ensuring no air is introduced.
Confirm sufficient pressure from the spare tire. Check the collection hose and bleed nipple for any blockages. Ensure the bleed nipple is sufficiently opened.
Setup:
Compatibility:
The Gunson LSR40 is designed for use on virtually all cars and light commercial vehicles with hydraulic brake or clutch systems. It includes various screw caps for common master cylinder reservoir types. For less common configurations, universal adapters are available separately.
Care:
