Best current price£65.32from eBay
Shopping.co.uk recommended and popular offers
eBay£65.32Visit shop Upol PLAS/5DG Plast X DARK GREY PAINT Plastic Bumper Trim Aerosol Can U-Pol X 4
Visit shop2 offers from £65.32 - £71.82
View price history by clicking the chart icon.
U-Pol Plast X is a specialized aerosol paint designed for automotive enthusiasts and professionals looking to restore or refresh plastic bumpers and trim components. Its key benefit is a fast-drying, high-coverage formula that adheres specifically to plastic surfaces, providing a durable grey finish; however, it requires thorough surface preparation and the use of a suitable plastic primer to ensure optimal adhesion and longevity.
| Colour | Grey |
|---|---|
| Model Part Number | PLASTX |
| Brand | U-Pol |
Yes, for optimal adhesion and durability on plastic surfaces, the use of a dedicated plastic primer is highly recommended.
No, this product is specifically formulated for plastic components and may not provide the correct adhesion or finish on metal surfaces.
Due to the fast-drying formula, typically 5-10 minutes is sufficient, depending on ambient temperature and humidity.
U-Pol Plast X is designed to provide a factory-standard appearance, generally resulting in a satin or semi-matte finish typical of automotive plastic trim.
Clean the surface thoroughly with a degreaser, remove any loose contaminants, and lightly abrade the surface with a fine sanding pad to create an anchor profile.
This is usually caused by inadequate surface preparation or lack of a plastic primer. Ensure the plastic was cleaned with a degreaser and properly primed before painting.
Remove the nozzle and soak in thinners, or replace it. Prevent this in the future by clearing the nozzle after every use.
Ensure you are using a consistent sweeping motion and maintaining the correct distance from the surface. Avoid spraying too close, which can lead to pooling.
Before use, ensure the plastic surface is completely clean, dry, and free of silicone or wax. Sand the area lightly if necessary to improve mechanical adhesion, and always apply a plastic-specific primer before using the Plast X topcoat. Protect surrounding body panels with masking tape and high-quality paper. After application, clear the nozzle by turning the can upside down and spraying until the propellant comes out clear to prevent clogs. Store the can in a cool, dry place away from direct sunlight to maintain shelf life.
