Loops Blue Twill Emery Roll - 25mm x 25m - 40 Grit

This emery roll is primarily designed for finishing and polishing metal surfaces. The 40 grit is best for initial preparation and shaping.

No, this emery roll is specifically not suitable for use on wood. It is designed for metal applications.

The blue twill backing provides flexibility and tear resistance, allowing the abrasive to conform to contours and withstand tougher use without easily ripping.

Store the roll in its original dispenser box in a dry, cool place away from direct sunlight and heat sources to maintain its adhesive and abrasive quality.

No, 40 grit is a coarse abrasive. It is suitable for removing material, shaping, and preparing surfaces, but for fine finishing or polishing, you would need grits of a much higher number (e.g., 240 grit and above).

You typically cut a length of the roll and adhere it to a flat surface, sanding block, or file, or use it with specific abrasive roll holders designed for such materials.

The roll measures 25mm in width and is 25m in length.

Ensure the emery cloth is adequately supported. Reduce excessive pressure or aggressive angles. Check for sharp edges on the workpiece that might be snagging the material.

The grit may be dull or clogged. Cut away the dulled section and use a fresh piece of the roll. Ensure you are using appropriate pressure for the material being worked.

Ensure the dispenser box is functioning correctly. Use a sharp cutting tool. If the material itself feels stiff, ensure it has been stored in appropriate conditions (avoiding extreme temperatures or humidity).