Best current price£52.49from GhostBikes.com
Shopping.co.uk recommended and popular offers
GhostBikes.com£52.49Visit shop Gilles Black Tg-02-Kit - Sprocket Guard For Yamaha Mt-10 Abs 2016-2021 Rear
Visit shop1 offer from £52.49
View price history by clicking the chart icon.
The Gilles Sprocket Guard (TG-02-KIT) is a high-performance safety component designed specifically for Yamaha MT-10 riders who frequent the track, offering essential protection by shielding the rider from the rear sprocket and chain assembly. While it provides an professional level of mechanical safety during intense riding sessions, riders should be aware that it is incompatible with Gilles Tooling PSA2 spools, requiring an alternative setup for rear paddock stand usage.
| Model Part Number | TG-02-KIT |
|---|---|
| Brand | Gilles |
While it can be mounted on street bikes, it is primarily designed for track safety regulations and is not necessary for standard road commuting.
The installation is straightforward for those familiar with basic motorcycle maintenance, but it requires careful alignment under the swing arm.
This specific kit is finished in black.
The mounting geometry of the sprocket guard overlaps with the space required for the Gilles Tooling PSA2 spool system, causing a physical clearance conflict.
No, the guard is mounted to the swing arm and does not make contact with the chain under normal operating conditions, so it has no impact on chain tension.
Verify that all mounting hardware is torqued to the correct specifications and check that the mounting surface on the swing arm is clean.
The guard is incompatible with PSA2 spools; you must use a different style of rear paddock stand or remove the guard if utilizing that specific spool system.
The installation requires the component to be mounted directly under the swing arm. Because this guard occupies specific mounting points, it cannot be used if your motorcycle is equipped with Gilles Tooling PSA2 spools. Before installation, ensure the swing arm is clean and free of debris. Regular maintenance involves checking the mounting bolts for proper torque before every track event to ensure the guard has not shifted due to road or track vibration. Periodically clean the guard with a mild degreaser to maintain the black finish.
