Best current price£28.31from eBay
Shopping.co.uk recommended and popular offers
eBay£28.31Visit shop Primaflow Virgin White Thread Paste 240ml - SEL5108
Visit shop
Debenhams£29.49Visit shop Mcalpine Unisex White Virgin Thread Paste 240Ml
Visit shop4 offers from £28.31 - £30.69
View price history by clicking the chart icon.
This Primaflow Virgin White Thread Paste is designed for plumbers and DIY enthusiasts needing a reliable seal for threaded joints in plumbing and heating systems. Its key benefit is creating a long-lasting, non-hardening seal on a wide variety of metal and plastic fittings with easy brush-on application. A potential caveat is its unsuitability for use with Fluorine, Molten Metal, or Oxygen Systems.
| Colour | White |
|---|---|
| Model Part Number | SEL5108 |
| Brand | Primaflow |
The Primaflow Virgin White Thread Paste is suitable for temperatures ranging from -45 to 200 degrees Celsius.
Yes, it is suitable for use on various plastic threads including PVC, CPVC, ABS, Polybutylene, Polypropylene, Polyethylene, and Nylon.
The product description states it is suitable for gases, but always consult local regulations and professional advice for specific gas applications, especially for fuel-gases.
The paste has a curing time of approximately 20 minutes for an initial set, but full cure may take longer depending on environmental conditions.
This paste is not suitable for use with Fluorine, Molten Metal, or Oxygen Systems.
No, the formula is designed to remain soft and will not dry out, stain, crack, or harden.
The paste can withstand pressures of up to 10,000 psi.
Ensure adequate paste was applied to all threads. Check for cross-threading or damaged threads. Reassemble the joint ensuring a firm, but not over-tightened, connection. Allow adequate setting time.
Ensure the tube cap is sealed when not in use. If the paste has been exposed to extreme cold, allow it to return to room temperature. Check for any foreign contaminants in the paste.
While the paste is designed not to harden excessively, the lubricating properties aid in assembly. For very long-term or high-temperature applications, some residual adhesion may occur. Ensure tools are used correctly for disassembly.
Setup: Ensure all threaded surfaces are clean and free from debris before application. Apply an even coat of the paste to the male threads using the built-in brush applicator. Assemble the joint promptly. Allow approximately 20 minutes for the paste to begin setting, though full cure may take longer depending on conditions.
Compatibility: This paste is compatible with all types of metal threads and plastic threads including PVC, CPVC, ABS, Polybutylene, Polypropylene, Polyethylene, and Nylon. It is suitable for pipework carrying air, steam, petroleum, oil, water, gases, and many chemicals. *Do not use* with Fluorine, Molten Metal, or Oxygen Systems.
Care: Store the tube in a cool, dry place away from direct sunlight. Ensure the cap is tightly sealed after use to prevent drying. The paste will not dry out in the tube, ensuring longevity.
