Ring Automotive Coolant System Leak Detection Dye - RLD2 - 25ml
Check your car for coolant system leaks with the Ring RLD2 Coolant System Leak Detection Dye. Usin...Check your car for coolant system leaks with the Ring RLD2 Coolant System Leak Detection Dye. Using UV light, the RLD2 dye will be seen clearly, making it much easier to identify leaks. Find leaks you would otherwise miss. Safe to leave in any system. Add to coolant system to detect leaks in water pipes and radiators. One 25ml bottle will do 10 litres of either OAT(pink) / IAT(yellow) automotive coolants. Ring Automotive UV Dyes find leaks quickly and easily. They are safe to leave in any system, so flushing and refilling the relevant systems after leak detection is not necessary unless required to repair the leak. UV light required to show dye leaks.
This guide is for anyone who wants to quickly and easily identify coolant leaks in their vehicle's cooling system using the Ring RLD2 Coolant System Leak Detection Dye. The key benefit is the ability to find leaks you might otherwise miss, saving time and potentially preventing costly repairs. Keep in mind that you'll need a UV light to see the dye and locate the leaks.
All features
Model Part Number
RLD2
Brand
Ring
Extended Product Information
FAQs
How much dye should I use?
One 25ml bottle is designed to treat up to 10 liters of coolant.
Is the dye harmful to my engine?
No, the dye is safe to leave in the coolant system.
What type of coolants is the dye compatible with?
The dye is compatible with both OAT (pink) and IAT (yellow) automotive coolants.
Do I need to flush the system after using the dye?
No, flushing and refilling are not necessary unless you are repairing the leak.
Can I use any UV light?
Yes, but for the best results, use a strong UV light. The product does not come with a UV light.
Where can I typically find leaks?
Common leak areas include hoses, radiator, water pump, and connections.
How long will the dye last in my system?
The dye will remain in your system until you flush and replace the coolant.
Can this product be used on all vehicles?
Yes, but always check your vehicle's coolant type.
Troubleshooting
Cannot see any leaks after adding the dye.
Ensure you are using a UV light and that it is functioning correctly. Allow the engine to run for a longer period to circulate the dye. Check in a dark area for better visibility.
Dye is visible, but the leak source is unclear.
Inspect all hoses, connections, the radiator, and the water pump closely. Sometimes leaks may be hard to locate.
Pros and Cons
Pros
Finds leaks quickly.
Safe to use and leave in the system.
Compatible with common coolant types.
Easy to use and understand.
Helps prevent serious engine damage.
Cons
Requires a UV light for detection.
Does not repair leaks, only detects them.
May require a flush and refill if the leak is repaired.
The dye itself does not fix the problem.
Setup, Compatibility & Care
Preparation: Ensure the engine is cool before adding the dye.
Adding the Dye: Add the contents of the 25ml bottle to the coolant reservoir.
Operation: Run the engine for a short period to circulate the dye.
Inspection: Use a UV light to inspect the coolant system for leaks. Look for areas where the dye is visible.
Compatibility: Compatible with OAT (pink) and IAT (yellow) coolants.
Care: Store the dye in a cool, dry place. Avoid contact with skin and eyes.