NeoFlex Magnetic Sheet - A6 - Neodymium - 3M Self Adhesive

The primary advantage is their exceptional strength, being 10x stronger than standard magnetic sheets, combined with the flexibility of rubber and a strong 3M self-adhesive backing.

The adhesive requires between 24 to 32 hours to achieve its maximum bond strength.

Yes, the sheets can be easily cut to any desired length or size using a knife or scissors.

The magnetic face has a striped north-south-north polarity to ensure a secure grip.

Each A6 sheet measures 148mm x 105mm x 0.75mm thick.

The magnetic side adheres to ferrous metals. The 3M adhesive will stick to most clean, smooth, non-porous surfaces. Always test on an inconspicuous area first if unsure.

Yes, B&Q's team of experts is available to provide technical advice and support for your specific application after purchase.

Ensure the application surface was thoroughly cleaned and dried before applying the adhesive. Re-apply pressure and allow the full curing time (24-32 hours) without disturbance.

Verify that the target surface is made of a suitable ferrous metal. Check for any debris or coatings on the magnetic face or the receiving surface that might interfere with the magnetic field.

This can sometimes occur due to temperature changes or if the sheet was tightly rolled. Allow the sheet to acclimate to room temperature for a few hours. If the issue persists, try gently bending it in the opposite direction of the curl.

Use a very sharp craft knife or heavy-duty scissors. For thicker cuts, multiple passes with a knife may be required. Ensure you are cutting on a protected surface.