Liberon Wood Filler - Dark Oak

Liberon Wood Filler has a minimum drying time of 1 hour. However, the exact drying time can vary depending on the thickness of the application and ambient conditions like temperature and humidity.

Yes, this wood filler is suitable for both interior and exterior use. However, for outdoor applications, it is essential to protect the dried filler with a suitable exterior-grade finish such as paint, varnish, or a decking stain.

The Dark Oak shade provides a good base. For a precise match, you can stain, varnish, wax, or paint the filler once it's dry. You can also mix Liberon Earth Pigments into the filler before application to achieve custom colours.

Yes, once fully dry, Liberon Wood Filler behaves much like wood and can be easily sanded, screwed into, and nailed without issue.

Apply the filler using a filling knife or spatula, pressing it firmly into the damaged area to ensure good adhesion and to avoid trapping air. Smooth the surface to be slightly proud of the surrounding area to allow for sanding.

Yes, the filler is designed to be flexible, which helps it to resist cracking and to accommodate minor wood movements.

Water-based fillers like this one typically have low odour, making them more pleasant and safer to use in enclosed spaces compared to solvent-based alternatives. They are also generally easier to clean up.

This can happen if the container has been left open. Try adding a tiny drop of water and kneading thoroughly. If too dry, it may not be salvageable.

Ensure thin, even layers are applied. For deeper holes, apply in multiple thin coats, allowing each to dry before applying the next. The product is designed for minimal shrinkage.

Ensure the filler is completely dry before staining. Lightly sand the filled area again before applying the stain. Test the stain on a small, inconspicuous area first.

Ensure the filler was applied to a clean, stable surface and that multiple thin layers were used for deep repairs. The formulation is designed to be crack-resistant.