Datavideo HS-1600T Mark II Portable Video Streaming Studio

HDBaseT is a technology that allows for the transmission of multiple signals (video, audio, power, control) over a single Ethernet cable up to 100 meters. It simplifies setup by reducing cable clutter and centralizing camera control.

While the HS-1600T Mark II supports standard video inputs, its advanced auto-tracking and direct control features are optimized for Datavideo PTZ cameras.

You can stream to any platform that supports RTMP or SRT protocols, such as YouTube, Facebook Live, Twitch, and more. It also supports dvCloud for multi-destination streaming.

The auto-tracking uses custom AI object tracking to identify and follow subjects. You can configure it with different speed settings and framing options for smooth camera movements without manual operation.

Yes, the HS-1600T Mark II has a built-in H.264 recorder that allows you to record your program content to an SD card simultaneously while streaming live.

It offers three RJ-45 inputs (supporting HDBaseT) and one HDMI input, providing flexibility for connecting various video sources.

No, the HS-1600T Mark II has a built-in H.264 encoder and recorder, allowing it to stream and record directly without the need for an external computer.

Ensure the camera and the HS-1600T Mark II are powered on. Verify HDBaseT cable integrity and connection at both ends. Confirm that the connected camera is HDBaseT compatible and properly configured.

Check all audio cable connections (XLR, RCA). Ensure the correct audio input is selected in the unit's settings. Verify that audio levels are appropriately set and not muted.

Ensure a stable internet connection. Consider using the SRT protocol for more robust streaming over unreliable networks. Reduce stream resolution or bitrate if necessary.

Ensure the camera is properly connected and recognized. Recalibrate tracking settings if available. Check for obstructions or poor lighting conditions that might affect AI tracking.

Verify the Ethernet cable is securely connected to both the device and the network router/switch. Check network settings on the device and ensure DHCP is enabled or a static IP is correctly configured.