Primaflow End Cap - 22mm

No, the Primaflow End Cap features integrated solder, meaning no additional solder or flux is required. This is a key time-saving feature of the product.

This specific end cap is designed for 22mm copper pipes.

Yes, the Primaflow End Cap is manufactured to BS standards and is suitable for use in gas installations, provided it is installed by a qualified professional according to relevant regulations.

Yes, the fitting is WRAS approved, making it safe and compliant for use in drinking water systems.

The primary advantage is the significant reduction in installation time and effort, as there is no need to manually apply solder and flux. The integrated solder simplifies the process.

The Primaflow End Cap is manufactured from copper to the EN 1254 standard.

Ensure the pipe and fitting were clean and free of oxidation. Reheat the joint thoroughly, allowing the integrated solder to fully flow. Check for any physical damage to the fitting or pipe.

The fitting may not have been heated sufficiently or evenly. Apply heat more intensely and directly to the fitting body. Ensure no flux was used, as it is not required and can interfere with the integrated solder.

Verify that you are using a 22mm pipe and that the pipe end is not deformed. Ensure the pipe end is clean and free of any burrs or obstructions.