Best current price£61.97from B&Q
Shopping.co.uk recommended and popular offers
B&Q£61.97Visit shop B&Q - Artisan Oak 67.5Cm X 15M Self-Adhesive Vinyl Wrap For Doors And Worktops
Visit shop2 offers from £61.97 - £65.49
View price history by clicking the chart icon.
The D-C-Fix Artisan Oak self-adhesive vinyl wrap is an ideal solution for DIY enthusiasts, tenants, and homeowners looking to revitalize tired kitchen worktops, cabinets, and furniture without the high cost of replacement. This high-quality woodgrain film offers a realistic oak finish, durable adhesion, and excellent lightfastness for long-term use. While it provides a professional-looking aesthetic and is easy to remove, it requires patience and a steady hand during the application process to avoid air bubbles and ensure a seamless alignment on edges and corners.
| Model Part Number | 5056525326519 |
|---|---|
| Brand | d-c-fix |
It is not recommended to place hot pans or trays directly onto the vinyl; always use a trivet or heat mat.
The vinyl is water-resistant, making it suitable for kitchen and bathroom surfaces, though it should not be submerged.
No, tools like a squeegee or cutting knife are sold separately.
Yes, provided the surface is smooth. If the grain is very deep, it may show through the film.
If applied to a clean, dry surface according to instructions, the adhesive is highly durable and designed to stay in place.
Yes, you can overlap seams, but for the best look, try to keep joins on the underside or less visible areas.
Use a pin to carefully prick the bubble and push the air out towards the hole using a squeegee.
Re-apply heat with a hairdryer and hold the film in place firmly until it cools and sets.
Apply more heat with a hairdryer to soften the adhesive further before peeling.
To begin installation, ensure the surface is smooth, clean, and free of dust or grease. Measure the area and cut the vinyl with a 2-3 cm overlap to wrap around edges. Use a plastic squeegee to smooth out air bubbles starting from the center and working toward the edges. For maintenance, simply wipe the surface with a damp cloth and mild soap; avoid using abrasive cleaners or harsh chemicals. To remove the film in the future, use a hairdryer to warm the material uniformly, then peel back slowly at an angle. Any minor adhesive residue can be cleaned away with warm soapy water and a soft cloth.
