Best current price£9.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£9.99Visit shop (600 X 100Mm) Stainless Steel Kick Plate Self Adhesive 5055889761608
Visit shop10 offers from £9.99 - £16.89
View price history by clicking the chart icon.
This Displaypro Kick Plate is designed for individuals and businesses seeking durable protection for the bottom of their doors. Its key benefit is providing a robust barrier against scuffs and damage, especially in high-traffic areas. A potential caveat is that the self-adhesive backing may not be suitable for all surfaces or extreme conditions. This brushed stainless steel plate, measuring 1000 x 150mm, offers reliable door protection with an easy application method, made in the UK for quality assurance.
| Colour | Silver |
|---|---|
| Brand | Displaypro |
The kick plate measures 1000mm in length and 150mm in height.
While made of stainless steel, the self-adhesive backing is best suited for interior applications or sheltered exterior doorways to ensure optimal adhesion and longevity.
Cutting stainless steel requires specialized tools and expertise. We do not recommend attempting to cut the plate yourself, as it may result in sharp edges or damage the finish.
With proper surface preparation and normal use, the self-adhesive is designed to provide a secure bond for an extended period. Avoid exposing it to excessive moisture or extreme temperature fluctuations.
It provides good protection against everyday scuffs, kicks, and light impacts. For areas subjected to very heavy or repeated forceful impacts, a mechanically fastened plate might be more suitable.
Removal may require careful prying with a plastic scraper and potentially a heat gun on a low setting to soften the adhesive. Be aware that removal may leave adhesive residue or potentially damage the underlying door finish.
Ensure the door surface is thoroughly cleaned, dried, and free of any oil, grease, or dust. Re-apply firm pressure across the entire surface of the plate.
Carefully lift the edge of the plate before it fully adheres and smooth out the bubble. If already adhered, you may need to carefully prick the bubble with a fine needle and press flat.
The self-adhesive is strong; repositioning may be difficult and could damage the surface or the adhesive. If repositioning is necessary immediately after application, lift slowly and carefully, applying minimal force to the door finish.
Setup: Ensure the door surface is clean, dry, and free from dust or grease before application. Peel back a portion of the adhesive backing and carefully align the kick plate with the bottom edge of the door. Slowly press the plate onto the door, smoothing it down as you peel away the remaining backing to prevent air bubbles. For best adhesion, apply firm pressure along the entire surface.
Compatibility: This kick plate is designed for flat, smooth door surfaces. It is compatible with most standard wooden, metal, or composite doors. It is not recommended for painted or finished surfaces where the adhesive might damage the finish upon removal, or for heavily textured surfaces where adhesion may be compromised.
Care: Clean the kick plate regularly with a soft, damp cloth. Avoid using abrasive cleaners or scouring pads, as these can scratch the brushed stainless steel finish. For stubborn marks, a mild soap solution can be used, followed by rinsing with clean water and drying with a soft cloth.
