Best current price£9.78from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£9.78Visit shop Weidmuller Rss113024f Miniature Switching Relay 24V Dc - 1454430000
Visit shop3 offers from £9.78 - £157.25
View price history by clicking the chart icon.
This Weidmuller RSS113024F switching relay is designed for industrial control systems needing precise digital signal processing for low electrical loads. Its key benefit is providing reliable switching and amplification of digital signals in a compact, plug-in form factor. A potential caveat is its specialized nature, best suited for applications with specific DC voltage requirements and load capacities. It features a single changeover contact, a 6A switching capability, and a 24V DC coil, making it ideal for PCB applications in various electronic and control systems.
| Series | RSS113024F |
|---|---|
| Model Part Number | 1454430000 |
| Brand | Weidmuller |
The rated control supply voltage is 24V DC, with an acceptable operating range of 21.6V to 28.8V DC.
This relay has a maximum switching capability of 6A at 250V AC.
No, this relay is designed for digital signal processing and low electrical loads, with a maximum rating of 6A. It is not suitable for high-power applications.
The IP67 rating signifies that the relay is dust-tight and protected against immersion in water up to 1 meter for 30 minutes, making it suitable for harsh environments.
No, this relay is specifically designed for DC coil actuation (24V DC).
A changeover contact has three terminals: a common terminal, a normally open (NO) terminal, and a normally closed (NC) terminal. You connect your load circuit to the common terminal and either the NO or NC terminal depending on your desired switching logic.
The relay has a width of 5mm, a height of 28mm, and a depth of 15mm.
Verify that the control voltage is within the specified range (21.6-28.8V DC) and that the polarity is correct. Check for loose wiring at the coil terminals. Ensure the relay is properly seated in its socket or on the PCB.
Ensure the load current and voltage do not exceed the rated limits (6A, 250V AC). Check for any physical obstructions or damage to the relay. If the issue persists, the relay may need replacement.
Check for vibrations that might be affecting the relay's seating. Ensure the operating environment is clean and free from excessive dust or moisture that could affect contact integrity. Clean the contacts if accessible and safe to do so, or replace the relay.
Confirm that the load current does not exceed the 6A rating. Ensure proper ventilation around the relay. Overheating can indicate an internal fault or exceeding operational limits.
Setup:
Compatibility:
Care:
