Haier Heat Pump Tumble Dryer - Grey - A++ - I-Pro Series 3

Open the door and pull out the filter. Remove the lint by hand or with a vacuum cleaner. Rinse the filter under water and let it dry completely before replacing it.

The I-Refresh program uses cool air to refresh and sanitize clothes, eliminating bacteria and odors.

The condenser does not require cleaning.

Select your desired drying program. Press the 'Delay Start' button and use the controls to set the desired start time. Then, press the Start/Pause button.

The drum is made of Galvanized material.

The energy efficiency class is A++.

Consult the user manual for a description of the error code and the recommended troubleshooting steps. If the problem persists, contact customer service.

The warranty period is two years.

Check if the dryer is properly plugged into the power outlet and that the power supply is working. Also, check the fuse.

Check if the lint filter is clean and if the dryer vent is blocked. Ensure you have selected the correct drying program for the load.

Reduce the load size. Also, ensure the lint filter is clean and the vent is free of obstructions.

Refer to the user manual for specific error code meanings and troubleshooting steps.

Ensure the dryer is level and that nothing is caught inside the drum. Contact customer support if the noise persists.