Maston Car-Rep Auto Spray Paint - Sky Blue - 400ml

Thoroughly clean the surface to remove dirt, grease, and contaminants. Sand lightly if needed for adhesion, then wipe clean. Use a suitable primer for optimal results, especially on bare metal or plastic.

The paint is fast-drying. It typically dries to the touch within minutes, but full curing takes longer. Allow at least 15-30 minutes between coats, depending on temperature and humidity.

Yes, this paint is suitable for most automotive plastic parts, provided they are clean and a suitable plastic primer is used if necessary.

The paint has a heat resistance of up to 100°C.

Store the can in a cool, dry place away from direct sunlight and sources of ignition or heat. Ensure the nozzle is clear after use.

The product has a shelf life of 60 months (5 years) when stored correctly.

It is generally recommended to apply multiple thin coats for an even and durable finish, rather than one thick coat. Allow adequate drying time between each coat.

Ensure the can is shaken thoroughly and frequently during use. Check for blockages in the nozzle and clean if necessary. Hold the can at a consistent distance (approx. 25-30 cm) and use smooth, sweeping motions.

Verify the surface was properly cleaned, degreased, and dried before application. Ensure a suitable primer was used if required. Ambient temperature and humidity may also affect adhesion; avoid painting in damp or excessively cold conditions.

Apply paint in thin, even coats. Avoid applying too much paint at once or holding the can too close to the surface. Allow adequate drying time between coats.

Turn the can upside down immediately after use and spray for a few seconds to clear the nozzle. If already clogged, try removing and cleaning the nozzle with a solvent like paint thinner or acetone, or replace the nozzle.