Pressure Washer Surface Cleaner - Outsunny - 13"

While compatibility varies, it generally performs best with pressure washers rated between 1500 and 3500 PSI for optimal rotation and cleaning power.

It is primarily designed for hard, flat surfaces like concrete and asphalt. Using it on softer materials like wood may cause damage or uneven cleaning. Always test in an inconspicuous area first.

The surface cleaner typically features a 1/4-inch quick-connect plug that attaches to the end of your pressure washer's spray wand.

Please refer to the product packaging or the manufacturer's website for specific warranty information, as it can vary.

The stainless steel disc is self-cleaning during operation. After use, rinse the entire unit with water and store it properly.

It can help lift and remove general dirt and grime. For stubborn stains like oil, pre-treatment with a degreaser may be necessary before using the surface cleaner for best results.

Ensure the water pressure from your pressure washer is adequate (typically above 1000 PSI). Check that the nozzles are not clogged and that the unit is properly connected.

Move the surface cleaner at a slow, consistent pace. Ensure the surface is relatively flat and free of major obstructions. Clean the spray nozzles for an even water distribution.

Check that the quick-connect fitting is securely attached. Inspect the O-ring or seal for wear or damage and replace if necessary.

Clean debris from around the casters. Inspect for any damage. If necessary, lubricate according to manufacturer recommendations for the casters (if applicable).