SmartSeal Imprinted Concrete Sealer - Matt Finish - 25L

A 25L container covers approximately 100-150 square meters, depending on the porosity of the concrete and the application method.

For optimal results and protection, apply two coats of SmartSeal Imprinted Concrete Sealer.

Allow the first coat to dry completely before applying the second coat. Drying times vary depending on weather conditions. Refer to the product label for specific instructions.

This sealer is specifically designed for imprinted concrete. It is recommended to test on a small, inconspicuous area first to ensure compatibility before applying to other concrete types.

Protect the treated surface from rain for at least 24 hours after application to allow the sealer to cure properly. If rain occurs shortly after application, assess the surface and reapply if necessary.

Regularly sweep the surface to remove debris. Clean spills promptly with water. Avoid using harsh chemicals or abrasive cleaners.

The longevity of the sealer depends on various factors, including traffic and environmental conditions. With proper care and maintenance, it can provide long-lasting protection, typically for several years.

SmartSeal Matt Finish Imprinted Concrete Sealer provides a matt finish, which generally offers a moderate level of slip resistance. However, always exercise caution, especially when the surface is wet.

Ensure the concrete surface is clean and dry before application. Proper surface preparation is essential for adhesion.

Apply the sealer in even coats, avoiding pooling. Use the correct application method (brush, roller, or sprayer) as recommended.

Ensure two coats are applied. If fading continues, reapply after the recommended time frame.

Clean the surface regularly. Reapply sealer if necessary to prevent regrowth.