Embroidery Style Frame Die - Sweet Dixie

The die is A6 in size, which is approximately 4.5 x 6.4 inches (105 x 148 mm).

Yes, this die is compatible with most leading manual die-cutting systems. You will need to confirm your machine's compatibility and recommended sandwich build.

This die is suitable for cutting paper, cardstock, thin acetate, and other similar crafting materials. It is not designed for thick materials like fabric or chipboard.

After use, gently brush away paper scraps. You can use a soft cloth slightly dampened with water if necessary, but ensure the die is dried thoroughly afterward to prevent rust.

While not its primary function, the embossed lines can serve as a visual guide. However, they are not pre-punched holes, so you would need to manually create stitch holes.

Using the die as a stencil allows you to precisely apply ink, paint, or other mediums to create the frame design on your project without having to cut the material itself.

Inspiration can often be found on the manufacturer's website (Sweet Dixie), craft blogs, social media platforms using relevant hashtags (e.g., #diecutting, #cardmaking), and in craft magazines.

Ensure you are using the correct 'sandwich' combination for your die-cutting machine. Try adding an extra shim (thin cardstock or paper) or using a fresh cutting plate. Check that the die is positioned correctly with the cutting edge facing the material.

Verify you are using the correct embossing mat and pad with your die-cutting system. Ensure the material is suitable for embossing and experiment with the pressure settings on your machine if adjustable.

Use a softer cardstock or paper. Ensure the die is sharp and free from any burrs. A gentler pass through the die-cutting machine may also help. For very delicate paper, consider cutting with an extra shim to support the paper.

Gently clean the die with a soft brush or a piece of packing tape to lift away small paper fragments. Ensure all small pieces are removed before the next use.