Best current price£94.95from Wholesale Domestic
Shopping.co.uk recommended and popular offers
Wholesale Domestic£94.95Visit shop Kartell White K-Rad Kompact Type 22 Double Panel With Double Convector Horizontal Radiator | | Mild Steel | 600Mm X 700Mm
Visit shop
B&Q£119.24Visit shop B&Q - Type 22 600 X 700 Radiator Compact Double Panel Double Convector White
Visit shop2 offers from £94.95 - £119.24
View price history by clicking the chart icon.
The Kartell Type 22 Compact Radiator is designed for homeowners seeking efficient and elegant heating solutions that maximize space. Its double panel and double convector design ensures high heat output, while the white enamel finish complements modern interiors. A potential consideration is its suitability primarily for two-pipe heating systems, requiring specific adaptations for single-pipe setups.
| Colour | White |
|---|---|
| Model Part Number | D607K |
| Brand | Kartell |
A Type 22 radiator features two steel panels with two convector fins sandwiched between them, providing higher heat output compared to Type 11 (single panel, single convector) or Type 21 (double panel, single convector) radiators.
Yes, but it is advisable to use diversion tees in the pipework to ensure optimal performance and even heating. Without them, the radiator may not reach its full heating potential.
The radiator comes complete with factory-fitted top grilles and side panels, wall brackets, a fixing kit (including plugs and screws), a nickel-plated plug, and an air vent.
Use a soft, damp cloth to wipe down the surface. Avoid using abrasive cleaners or chemicals that could damage the white enamel coating.
The Kartell K-Rad radiator is covered by the Kartell 'No Quibble Guarantee' against any manufacturing faults for 10 years from the date of purchase.
The radiator is suitable for operating pressures of up to 10 bar and a maximum operating temperature of 120°C.
The radiator has 4 x 1/2" connections. You will typically need to purchase compatible radiator valves separately, depending on your plumbing setup. Adapters for 1/2" connections are available if required.
Ensure the radiator is properly bled to remove trapped air. Check if diversion tees are used in a single-pipe system. Verify the central heating system is functioning correctly and the thermostat is set appropriately.
Gently tighten the relevant connection. If the leak persists, ensure appropriate sealing tape (e.g., PTFE tape) was used during installation and that the fittings are not damaged.
Expansions and contractions can cause minor noises. Ensure the radiator is seated correctly on its brackets; the plastic inserts should minimize this. Air trapped in the system can also cause gurgling sounds; bleed the radiator.
For minor scratches, consult the manufacturer for touch-up paint solutions. For significant damage, contact Kartell customer support regarding repair or replacement under warranty.
Setup:
Compatibility:
Care:
