Best current price£7.31from eBay
Shopping.co.uk recommended and popular offers
eBay£7.31Visit shop PrimaPress Pressfit Fitting Reducer 35x22mm
Visit shop
The Range£7.35Visit shop Primapress Pressfit Fitting Reducer 35X22mm - Grey
Visit shop4 offers from £7.31 - £8.33
View price history by clicking the chart icon.
The Primaflow Pressfit Fitting Reducer (35x22mm) is designed for professionals in plumbing and gas fitting requiring a reliable, high-specification connection for water, gas (range only), and glycol systems. Its key benefit is a fast, flameless installation with a certified leak-before-press detection system, ensuring safety and efficiency. A potential consideration is its compatibility exclusively with M press jaw tools.
| Model Part Number | 35X22mm |
|---|---|
| Brand | Primaflow |
Primaflow Pressfit fittings are designed for use with copper pipes. Always ensure the pipe meets relevant standards and is the correct size for the fitting.
This fitting is approved for gas range only. It is not suitable for general natural gas or LPG installations beyond this specific application.
The fittings can operate within a temperature range of -10 to 110 degrees Celsius.
Primaflow offers a market-leading 50-year Manufacturing Defect Warranty on these pressfit fittings.
Yes, you will need a compatible M press jaw tool to install Primaflow Pressfit fittings.
It means that if the fitting is not pressed correctly, it is designed to leak slightly under low pressure *before* the full press is applied, alerting you to a potential issue before it becomes a major problem.
Yes, the fittings are WRAS approved, which means they are certified for use in potable (drinking) water systems in the UK.
Ensure the pipe is clean, deburred, and fully inserted into the fitting. Verify that the correct M press jaw tool is being used and that it has completed its full pressing cycle. Check for any obstructions or damage to the fitting or pipe.
Check that the press jaws are correctly seated on the fitting. Ensure the tool is adequately charged (if battery-powered) and functioning correctly. Consult the press tool's manual for specific troubleshooting steps.
The leak-before-press system should have indicated a problem prior to full pressurization. If a leak occurs, the fitting may need to be removed and replaced. Ensure the pipe and fitting were not damaged during installation and that the correct pressing procedure was followed.
Setup: Ensure the pipe ends are clean, deburred, and properly chamfered before insertion. Insert the fitting fully onto the pipe. Using a compatible M press jaw tool, align the jaws correctly over the fitting and actuate the tool to create the seal. The tool will indicate when the press cycle is complete.
Compatibility: This fitting is exclusively compatible with M press jaw tools. Ensure your tool is in good working condition and calibrated as per the tool manufacturer's guidelines. It is suitable for use with copper pipes within the specified dimensions.
Care: PrimaPress fittings are designed for permanent installation and do not require routine maintenance. However, the surrounding pipework should be inspected periodically as part of a general system maintenance check. Keep fittings dry and free from excessive dirt or debris during storage and installation.
