Klingspor Sanding Belt - 75x533 mm - 100G

This sanding belt is versatile and can be used on wood, metal, non-ferrous metal, paints, varnishes, and filler.

'100G' refers to the grit size, indicating a medium-fine abrasive level. It's suitable for smoothing after coarser grits or for preparing surfaces for finishing.

You need to check if your portable belt sander requires belts of the dimensions 75 x 533 mm. Always refer to your sander's manual for compatible sizes.

For very heavy material removal, a coarser grit (e.g., 40G or 60G) would be more appropriate. The 100G is best for medium-level abrasion and smoothing.

The belt is constructed with a tear-resistant back and a dense synthetic aluminium oxide coating bonded with full synthetic resin, designed for longevity and durability in demanding tasks.

Klingspor is a German company with over 125 years of experience in grinding tools, known for quality manufacturing.

Sanding belts are consumable. While light brushing can remove some dust, they are not intended for deep cleaning or prolonged reuse. Replace the belt when it becomes dull or worn.

Ensure the belt is correctly tensioned. Check that the rollers on your sander are clean and free of debris. Verify the belt dimensions match your sander's requirements.

Ensure you are using the correct grit for the material and task. Avoid excessive pressure or forcing the belt. Check for any sharp edges or obstructions on the material being sanded or on the sander itself.

Check that the belt is tracking correctly on the sander. Ensure consistent pressure is applied during sanding. Clean any accumulated dust from the belt surface and the sander's rollers.

This can happen when sanding soft materials or gummy finishes. Ensure the grit is appropriate. Consider using a faster belt speed if your sander allows, or try a coarser grit if appropriate for the material.